Plastic PVC PP PE Single Wall Corrugated Pipe Production Line / Making Machine / Extruder
Introduction of Plastic PVC PP PE Single Wall Corrugated Pipe Production Line / Making Machine / Extruder
It consists of automatic feeding system/single screw extruder/die head/forming machine /winder. It is mainly produce PE/PP/PVC single corrugated tube. The PE/PP/PVC single corrugated tube is mainly used in the golf course, playgrounds as light load of drainage, floods; Interior decoration cable casing; Automotive wire casing; The washing machine, air conditioner drain; Prestressed concrete special tube, etc.
Features of PE/PP/PVC Single Wall Pipe / Tubes:
1). It has good flexibility: to resist distortion, bending good performance Acid, lubricating oil, cooling fluid, etc
2). Exterior luster, friction resistance
3). Carrying capacity is strong, can bear the weight of the foot, doesn't break, deformation, can quickly recover, and itself without any damage
Features of Plastic PVC PP PE Single Wall Corrugated Pipe Production Line / Making Machine / Extruder:
1). Adopt Electric-magnetic heater which can save 40% to 60% electric energy .
2). All electric parts ( breaker/relay/ inverter ) is SIEMENS/SCHNEIDER/OMRON
3). PLC control and simple operation
4). The forming machine has 38 pairs to 72 pairs forming block.
5). Production speed is 15m/min to 25m/min.
Technical Parameter of Plastic PVC PP PE Single Wall Corrugated Pipe Production Line / Making Machine / Extruder:
| pipe diameter(mm) | 4-10 | 9-32 | 16-63 |
| Extruder | SJ-30 | SJ-45 | SJ-65 |
| L/D | 30:1 | 30:1 | 30:1 |
| Max output(kg/h) | 10 | 40 | 80 |
| Main motor power(kw) | 4 | 11 | 18.5 |
| Corrugator power(kw) | 1.1 | 1.5 | 2.2 |
| Mold Quantity | 40 | 44 | 44 |
| Cooling type | water and air cooling | water and air cooling | water and air cooling |
| Line speed(m/min) | 6-10 | 8-12 | 8-15 |
| Counting type | sense counting | sense counting | sense counting |
| Winding type | Motor-driven | Motor-driven | Motor-driven |
Technology and Service:
1.Seller supply full set of technical document, cutter and other full document (write in English) for the extrusion
machine.
2. Seller supply training for buyer's staff until buyer can produce the eligible production independently.
3. Seller is responsible for installing, testing, adjusting and debugging the machines in buyer's factory.
4. Buyer should pay the expense for our engineers including for our engineer including round- way tickets,
inland traffic, lodging and boarding fee when the machine is installed, tested and maintained.
5. Seller will go to install machines after the machine is arrived at buyer and buyer will have prepared all
conditions (including power, water, compress air, tools and materials for producing pipe, etc) for installing and
testing these machines.Buyer should pay 60USD/day.
6. When installing, people of both sides cooperate well and carefully, buyer supplies convenient working
condition, any problem, should discuss peacefully and kindly.
7. Buyer supply proper working tools, equipments and other conditions.
8. The expense including the accommodation and materials of the trial-run the machine for testing and other
expenses(electric, water, air and worker) will be on seller's account, if the buyer or their representatives do
the inspection of the machines before shipment.
9. Guarantee period:14 months after shipment (the date of B/L)
