PVC high pressure pipe extrusion machine / extruder / production line
PVC high pressure pipe extrusion machine / extruder could produce the PVC braided fiber reinforced soft pipe, be used for high pressure usage,as gas or high pressure water.
Specification: 1/8, 3/16, 5/16, ¼, 3/8, ½, 5/8, ¾, mm
Raw material: PVC Granular material and yarn
PVC high pressure pipe extrusion machine / extruder / production line condition:
|
Warehouse/Workshop |
Dimension (M*M*M): 10m (L)×2m(W) × 2.4m (H) |
|
Temperature & Humidity |
≤40, |
|
Power supply & Installation |
According to your customer requirment |
|
Wire/cables: |
Wires/cables from power supply to control cabinet of this production line |
|
Cooling Water hose/pipe |
Water supply to machines and pools |
|
Lubrication oil |
Exxon mobile |
|
Compressor |
Supply compressed air |
PVC high pressure pipe extrusion machine / extruder / production line video:https://youtu.be/kO1-2_Da2xQ
PVC high pressure pipe extrusion machine / extruder / production line configuration
Installed Power: 68KW , 380V three phases+natural+ground, 60HZ
Load Factor: 50%-80%
Circulation cooling water: 2m3/h
1. Automatic feeding system 1set
2. Single screw extruder: SJ- 50x28 1set
3. Extrusion Dies for inner layer transparent hose 1 set
4. Cooling water tank: 1set
5. Haul off unit 1set
6. Braider 1 set
7. Dryer Oven unit 1set
8. Winder with one coiler 1 set
9. Digital Electrical System 1 set
Technology and Service:
1. Seller supply full set of technical document, cutter and other full document (write in English).
2. Seller supply training for buyer’s staff until buyer can produce the eligible production independently.
3. Seller is responsible for installing, testing, adjusting and debugging the machines in buyer’s factory.
4. Buyer should pay the expense for our engineers including for our engineer including round-
way tickets,
