PRODUCT
AR Fiberglass Chopped Strand (Micvin ar fiberglass) was the main raw material for Gypsum Board, Concrete Reinforcement, Cement Reinforcement and other Concrete/Gypsum Products. Alkali Resistant Fiberglass Chopped Strand is the new product for environmental protection property. It was widely used in the field of Construction Industry. Alkali Resistance Fibreglass Chopped Strand was treated by silane coupling agent, which makes it has excellent dispersity and composition with other inorganic materials and resin for actual us.
(1) Pre – mixed AR Fiberglass Chopped Strand
Properties:
It has excellent properties with alkali resistance, stiffness, bundle – state, ageing – proof, Mixed 20 minutes in cement at 50rpm,it can still keep good bundle state, it won't dispersed to filament.
Purpose:
It is a high integrity AR Glass Fiber Chopped Strands designed for use in the reinforcement of concrete, renders and mortars. It may be added to conventional mixes either on site or by prepending with other dry mix components. The low – tex strands permits efficient reinforcement at low dosages. They are particularly suited to the modification of standard concrete mixes for floor screeds and slabs, and for the preparation of prebagged mixes of special mortars and renders.
(2) Water – dispersed AR Fiberglass Chopped Strands
Properties:
AR Glassfiber Applied with water – dispersed size, the strands will disperse well to filaments in water in 10 seconds, and also disperse fast, usage amount less, enlarge strength.
Purpose:
It is typically used at a low level of addition to prevent cracking and improve the performance of ready mix concrete, floor screeds, renders or the special mortar mixes.it can be used for surface crack – proof of GRC products.
[APPLICATION]
Applying for Fiberglass Reinforced Cement/Concrete
[SPECIFICATION]
Code | Length(mm) | Diameter(um) | Compatibility | Applying Process | LOI % | Moisture Content % |
G1 | 6/12/20/24/30 | 13 | Cement/Concrete | Premixed/Water-dispersed | 1.3-1.6 | <=0.2 |
[PRODUCT PROPERTIES]
AR (Zirconia Content 14.5% or 16.5%) chopped strand used to prevent crack of GRC components
Good Integrity and no static electricity
Low Fuzz
Excellent integrated with cement
Good filament flexible and magnificent strands distribution cement
Endued good physical and chemical properties for GRC
Disperse Fast
Low Dosages
Harmless
Product life same as building
[TO USE]
--Mix your resin and hardener, or catalyst
--Next add your AR Fiberglass Chopped Strands
--It is best to use a paint mixer on your power drill to ensure that all of the strands are properly saturated
Thick layers and large pour areas can create excessive heat, so proceed with caution.
[PACKING]
AR Fiberglass Chopped Strand packed in Kraft bag, 25 kg per bag,36 bags per pallet, the net weight will be 900kg per pallet.
[STORAGE]
Micvin's AR Fiberglass Chopped Strand should placed under dryness condition and shall no be open the covering membrane until applying
[READ BEFORE USING]
They should be added where increased strength is needed for bonding, filleting, and fastening with resin
[CAUTION]
Dry powder materials can build up static charges, Proper precautions must be taken in the presence of flammable liquids
[WARNING]
AR Fiberglass Chopped Strand can cause eye irritation, harmful if inhaled, may cause skin irritation, harmful if swallowed
Avoid contact with eyes, and contact with skin, Wear goggles and face shield when handing. Always wear an approved respirator. Use only with adequate ventilation. Keep away from heat. Spark and flame. Store handle and use in a manner that minimizes dust generation,
[FIRST AID]
In case of contact with skin, wash with warm water and soap. For eyes immediately flush with water for 15 minutes. If irritation continues seek medical attention. If inhaled, move to a fresh air environment. If you have breathing difficulties seek immediate medical attention
[ATTENTION]
Container may be hazardous when empty. Empty containers container product residue.
FAQ:
1. How to contact
Call me through Phone +86 13513080251
E-mail:office@micvin.com
Skype: simba.dan
2. Can i visit your factory?
Of course, factory located in Hebei, Fly to Shijiazhuang airport, we will pick you up
3. How long the warranty period
At least 2 years warranty period
4. How long can get a reply
Most 4 hours
