40 inch Glass Fiber Oil Filter Element Pleated 1 Micron Filter Cartridge
1. Filter Media:PP,PET,Glass Fiber
2. OD:64mm
3. ID:28mm
Oil filter cartridges for water filter system in industry pp filter cartridge
DLOF Series Pleated Filter cartridges are manufactured to exact standards and are used in the most demanding industrial environments. Manufactured in a range of length options and micron ratings. Media has a fixed pore construction of high qualityFibres. The combonation of surface and depth filtration provides a long lifetime. Due to use of the premium quality filter fabrics, the pleated filter cartridges have superior flow characteristics with very low pressure drop compared to depth media of similar micron rating. Due to large filter area and design, allow the use of a reduced number of cartridges. Your advantage is a smaller filter vessel, less footprint and lower capital investments. The pleated cartridges have a very large filtration area and therefore a very high dirtholding capacity. Long cartridge lifetime means lower operational condumable costs, Less work changing the cartridges and less waste and the Fully thermal welded construction can be used safely on High temperature Oily water,solvents,acid and diesel.
Application:
Chemical
Oil & Gas Ind
Metal Treatment
Process Water
Electronis
Coatings, Paint
Petroleum
Prefiltration
Specification
| Outside Diameter: | 64mm |
| Inside Diameter : |
28mm |
|
Length : |
10",20",30",40" |
| Filter Media : | PP , PTE,Glass Fiber |
| End Cap Material,Center Core : | PP |
| Out cage | PP |
| Seal Material : | Silicone, EPDM, NBR, Viton |
| End Cap Types : |
DOE,-226/Flat End |
| Removal Rating : |
1μm,2μm,5μm,10μm,20μm,50μm |
| Operating Pressure and temperature : |
The pleated cartridge construction will withstand differential Pressures up to 60 PSI(4Bar) at ambient temperature. |
|
Service condition : |
500KPa(5Bar)by 20°C Beta: 5000(99.98% removal efficiency) for glass fiber media. |
