Water Filtration Pleated PTFE Filter Cartridge / 20 Inch Water Filter Cartridge
Darlly PTFE pleated micron filter cartridge for water filtration
General Description:
The DLM-PTFE pleated filter cartridge is constructed of imported nature hydrophobic polytetrafluoroethylene menbrane media and nonwoven support materials. The materials of cage, core, and end caps are polyproylene. Adaptors are thermally welded with media without using any glue or adhesives to prevent any possiblity of pollution.
Applications:
1. Fermentation tank
2. Vent filter of hold tank
3. Electronic industry
4. Semiconfuctor: ultrapure gas filtration
5. Chemical industry
Features:
1. Excellent performance of high temperature-resistance, repeat steam ability in situation.
2. Hydrophobic menbrane with high flow
3. Low pressure drop, high flow rate, long service life
4. 100% integrity tested
5. Non fiber-releasing
6. FDA compliance material
Specifications:
| Outside Diameter: | 2.7” (69mm) |
| Length: | 9.75",10", 20", 30", 40" |
| Filter media: | PTFE |
| Support/Drainage and End caps : | Polypropylene (PP) |
| Cage/Core/End cap : | Polypropylene (PP) |
| Seal Material : | Silicone, EPDM, NBR, Viton, Teflon, E-FKM |
| Removal Rating: | For gas: 0.01um, 0.02um For liquid: 0.1um, 0.22um, 0.45um, 1um |
| Maximum Operating Temperature: | 80°C |
| Maximum Differential Pressure: | 4.2Bar @25 |
| Maximum operating differential pressure (reverse direction) | 2.0Bar @25 |
