Polypropylene PP Melt Blown Filter Cartridge Element For Water Treatment
NSF approved PP melt Blown filter element for water treatment
| Outside Diameter: | 63mm,115mm or up to customers' request |
| IInside Diameter | 28mm,30mm |
|
Length: |
9.75'',9.87'',10'',20'',30'',40'',50'',60'' |
| Filter media and End Caps | Polypropylene (PP) |
| Core: | Polypropylene (PP) |
| Gaskets/O-ring : | Silicone,EPDM,NBR,Viton |
| Removal Rating: | 1 µm , 3 µm , 5 µm , 10 µm ,25 µm ,50 µm ,75 µm,100µm,150 µm |
| Maximum Operating Temperature: |
82°C |
| Maximum Differential Pressure: |
2.0Bar at 21°C |
PP Melt Blown Filter Cartridge is fusing and intertwined of polypropylene resin without any chemical glues. The cartridges are glued at random to form 3D micro pore which will make the cartridge 3 layers with fine fibers in surface and coarse fibers and deep filtration. As the fiber and density form high filtration rating and pollutants holding capacity on diameter of filter cartridge, low pressure drop, gradual changing deep filtration structure with loose outside and close inner, strong pollutants holding capacity, it can remove contaminant effectively, such as suspended substance, particulate and rust, providing efficient filtration and long service life.
Feature
Three layers structure cartridge offers high dirt holding capacity, longerservice life
Formed by thermal bond without using any binders and adhesives.
100% Pure Polypropylene will not cause any pollution to water
Wide Chemical compatibility
Groove design to extend the filtration surface area.
All kinds of adaptors are available.
Applications
Drinking Water Treatment
Electronic
Industrial Water Treatment
Plating
Chemicals, solvents
Specifications
Dimensions:
Outside Diameter: 63mm, 115mm
Inside Diameter: 28mm
Length: 5", 10", 20", 30", 40", 50", 60"
Material of Construction:
Filter media: Polypropylene
End caps: Polypropylene
Cores: Polypropylene
Gaskets/O-ring: Silicone, EPDM, NBR, Viton, Teflon
Performance Specification:
Micron Rating: 0.5, 1, 5, 10, 20, 30, 50, 100 Micron
Maximum Differential Pressure: 2.0 bar @ 21temperature
Maximum Operating Temperature: 65-90temperature
Flow Rate vs. Differential Pressure
Differential Pressure (bar)
Flow Rate (GPM), water, 20temperature
Order Information
Normal Product Code: DLPP-Rating-Length
For Example:
DLPP-0100-10-III-S
PP, Rating: 1um, Length: 10", 226/Flat End, Seal Material: Silicone
