New Hantek DSO1062BV Digital Handheld 60MHz 1Gsa/S 2 Channels Oscilloscope /Multimeter 60MHz 1Gsa/S 2 Channels
1.Feature
Isolated level: 1000V CATII, 600V CATIII.
High Bandwidth 60MHz Oscilloscope, 1GSa/s sample rate, 6000 Counts DMM with analog bargraph and data recorder.
1M Memory Depth.
High Refresh Rate (2500 frames).
Large 5.6 inch TFT Color Display, High Resolution(640*480), Dual-Window Design --More clear, More detailed.
One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform.
Easy-to-use pop-up menu with built-in multi-language help system.
32 Automatic Measurements.
Waveform Math: Add, Subtract, Multiply, and Divide.
Store and recall over.
Automatic cursor tracking measurements.
XY Mode.
Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems.
Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames.
Pass-Fail function compares a stored waveform to an unknown input.
Average Mode for smoothing waveforms.
Square Wave Output (2V, 1kHz) for probe adjustment.
USB Host/Device 2.0 full-speed interface, support removeable disk, LAN Option, easy to control by PC or long-distance.
Dimensions (mm):240(L)x165(W)x50(H), be carried easily.
2.Hardware Specifications
|
Model |
DSO1062S | |||
| Bandwidth | 60MHz | |||
| Channel | 2 | |||
| Real-Sample Rate | 1GSa/s | |||
| Equivalent Sample Rate | 25GSa/s | |||
| Record Length | 1M | |||
| Rish time | ≤5.8ns | |||
| Timebase Accuracy | ±50ppm | |||
| Time Base Range | 4ns/div-2ks/div | |||
| Input Impandance | 1MΩ | |||
| VOLTS/DIV Range | 2mV/div5V/div | |||
| A/D Converter | 8bit | |||
| Position Range | ±50V(5V/div), ±40V(2V/div500mV/div), ±2V(200mV/div50mV/div), ±400mV(20mV/div2mV/div); |
|||
| DC Gain Accuracy | ±3% for Normal or Average acquisition mode, 5V/div to 10mV/div; ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div |
|||
| Bandwidth Limit | 20MHz | |||
| Trigger Types | Edge, Video, Pulse, Slope, Over time, Alternative | |||
| Trigger Source | CH1, CH2, | |||
| Math | +,-,x,÷,FFT, Invert | |||
| Cursor Measurement | Voltage difference between cursors: V; Time difference between cursors: T; Reciprocal of T in Hertz (1/ΔT); |
|||
| Auto Measuerment | Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF | |||
| The float voltage between BNC and Ground | 600V CATIII, 1000V CAT II | |||
| The float voltage between each Channel | 600V CATIII, 1000V CAT II | |||
| The float voltage between Multimeter and Ground | 1000V | |||
| The float voltage between input Ports directly | 400V CAT II | |||
| Input by 10:1 probe | 600V CATIII, 1000V CAT II | |||
| DMM Max. Resolution | 6,000 Counts | |||
| Testing Modes | Voltage, Current, Resistance, Capacitance, Diode & Continuity | |||
| Max. Input Voltage | AC: 600V, DC: 800V | |||
| Max. Input Current | AC:10A , DC: 10A | |||
| Max. Input Impandance | 10MΩ | |||
| Display | 5.6"TFT 16K Color Display, 640*480 dots | |||
| Size | 245mm x 163mm x 52mm | |||
| Weight | 1.3KG(Without Package) | |||
| Standard Probe | PP80x2 | |||
Function Picture
|
If connect to computer, it can be used as a virtual os |
