Pin type Horizontal Sand Mill / laboratory grinding mill with Pneumatic diaphragm pump
Pin-type Horizontal Sand Mill
Product information:
Ranentech Pin-type Horizontal Sand Mill is adopting pin-type grinding structure and arrange it in different combinations to make grinding medium passing the maximum energy, high grinding efficiency with double end face forced cooling mechanical sealing. Good sealing efficiency, running reliable. Separation system with large flow dynamic gap separator. In the large flow situation will not have discharging hole blockage, with big open area, gap width 0.05mm to 2.0mm, grind ing media can be used more than 0.1mm.
Product Features:
1. Higher efficiency, high operability.
2. Suitable viscosity: under 20000CPS.
3. Large quatities of solid and liquid two phase suspension.
4. Import container type double mechanical sealing, its safty is better than other pin type sand mill.
5. Cavity and pin with high wear-resistant alloy, non-loss, no rust, grinding chamber volume can be adjusted.
6. Grinding material does not change color, not any pollution.
7. The shell, end face and the spindle are with cooling, cooling effect is good, the material temperature can be controlled within 45 (10 of frozen water)
8. Separation screen: the use of special high wear-resistant material, screen clearance can be adjusted according to different size grinding beads, simple and convenient; and there is a protective device to prevent beads blocked.
9. Grinding medium fineness optional range from 0.3 to 3mm → high efficient large flow rotor separator, it will be the 3 to 5 times nm of ordinary sand mill.
10. Grinding material fineness can reach 1um (may be adjusted according to the client process).
Product Features:
|
Model |
YRBM-5 Pin-type |
YRBM-20 Pin-type |
YRBM-30 Pin-type |
YRBM-50 Pin-type |
|
Dimension(L×W×H) |
880×1000×1300 |
1800×1000×2000 |
1200×1150×1750 |
2000×1300×1800 |
|
Motor power(kW) |
7.5 |
22 |
30 |
45 |
|
Speed(rmp) |
1440 |
1200 |
850 |
750 |
|
Grinding cavity volum(L) |
5 |
20 |
30 |
50 |
|
Adjusting cavity volum(L) |
0 |
0 |
2 |
2 |
|
Scattered dial or pin number(pcs) |
30 |
35 |
40 |
36 |
|
Material handing methods and specification |
Pneumatic diaphragm pump G1/2" |
Pneumatic diaphragm pump G1" |
Pneumatic diaphragm pump G1" |
Pneumatic diaphragm pump G1" |
|
Supplying air pressure(bar) |
37 |
37 |
37 |
37 |
|
Air consuption(m3/min) |
0.2 |
0.6 |
0.6 |
0.6 |
|
Grinding medium type |
95 beads |
95 beads |
95 beads |
95 beads |
|
Grinding medium diameter(mm) |
1.01.5 |
1.01.5 |
1.01.5 |
1.01.5 |
|
Grinding medium filling rate(%) |
60 |
60 |
60 |
60 |
|
Grinding medium weight(kg) |
8 |
40 |
60 |
100 |
|
Material grinding fineness(μm) |
5 |
5 |
5 |
5 |
|
Viscosity(cps) |
2 million |
3 million |
3 million |
3 million |
