PPGI Steel Coils:
1.Thickness ; 0.16-1.5mm
2. Width : 914-1250 mm
3. Zinc : 40-180g
Quality | Q/BQB 440-2003 | JIS G3312-1994 | EN 10326-2004 | ASTM A653-02a |
EN 10327-2004 | (BASE PLATE) | |||
(BASE PLATE) | ||||
Commercial Steel | TDC51D | CGCC | DX51D+Z/AZ | CS Type A/B/C |
Forming Steel | (TSt01,TSt02,TSt03) | CGCD1 | FS Type A, Type B | |
Drawing | TDC52D /TDC53D | - | DX52D+Z/AZ | DDS TYPE A/C |
Steel | DX53D+Z/AZ | |||
Structural | TS280GD(TStE28) | CGC400 | S280D+Z/AZ | SS275 |
Steel | TS350GD(TStE34) | CGC440 | S350D+Z/AZ | SS340 Class1 |
Available Size:
Manufacturer | Thickness | Width | Length of plate | Inner diameter of coil |
SHANDONG or TIANJIN | 0.2-1.2mm | 800/914/1000/1200/1219/1250mm | 1000-6000mm | 508mm/610mm |
Prepained galvanized steel | Application | Roof/sandwich panel |
Thickness | 0.23 ~ 1.0mm | |
Width | 914 ~ 1250 mm | |
AZ coating | 60g/m2 ~ 180 g/m2 | |
Coil Weight | 4 ~ 10 T | |
Standard | CGCC, EN10169, etc | |
Coil ID | 508/610mm | |
Color | All RAL colors or customized color | |
Merit | superior flatness & good thickness tolerance control by ABB/ | |
Production capacity | 2 galvalume line | |
Base material | galvalume steel coils | |
Description:
480000mt/year in both 2 mills by 5 color coating lines
CGCC, EN10169, etc
0.23-0.8mm thick, 1000~1250mm wide
AZ60-180+/-20
CW: 4-10Mt
ID: 508/610mm
Base material: galvalume steel coils
All RAL colors or customized color
Merit: superior flatness & good thickness tolerance control by ABB/Siemens Automation;
Loading
(1) Large quantity such as more than 1000T, quantity deponded on diferent port, could be ship in bulk,
for less freight cost.
(2) Small quanlity usually ship by container
Applications:
Roof, sandwich panel,floor decking
Competitive Advantage:
Panhua Group Co., Ltd was established in 2004.Now Panhua possesses about 10 square kilometers
of land and 3400 employees in total. By turnover, Panhua Group is ranked among Top500 Chinese
Companies.
We are making continuous efforts to provide you cold rolled steel coils, galvanized steel coils, prepainted steel coils, and all dimensions of steel sheets to meet end users’ demands by cut-into-length and slitting lines. Our tandem and single stand cold rolling mills are fully imported from USA, Germany, Japan, and India. Equipped with ABB and Siemens automation, all our equipment can offer you accurate dimensions, minimized tolerance, superior heat & corrosion resistance, and aesthetic appearance.
Since 2006, Panhua has been exporting steel coils to more than 50 countries directly. Our long term
supply extends to USA, UK, Germany, Italy, Spain, Belgium, France, Poland, Greece, Ukraine, Belarus,
Russia, Turkey, Egypt, Saudi Arabia, Iran, Ethiopia, Niger, Brazil, Colombia, Chile, Peru, Australia,
New Zealand, etc…
&nbs
