Adopt accumulator die head extrusion blow molding machine 20L chemical tank
Brief introduction
MP85 adopted accumulator die head are suitable for producing large and various plastic products, such as tool boxes, water tanks, beer drums, jerry cans, and automobile components.
multi-point parison controllers with lateral take-out mechanism. Machine frame and die head are movable for replacing molds easily,Flexiable for various container.
Mainly applicable field:
10L,20L,25L chemical container (without view strip)
Toys
tool box
baby seat
toilet seat
Machine specification:
| Max container capacity | L | 30 |
| Number of die | set | 1 |
| Machine Dimension(L×W×H) | M | 4.8×2.6×3.2 |
| Total weight | ton | 14 |
| Clamping force | kn | 280 |
| Platen opening stroks | mm | 400-900 |
| Stroke of mould board | mm | 500 |
| Max mould size(W×H) | mm | 600×1000 |
| Screw diameter | mm | 85 |
| Screw L/D ratio | L/D | 24 |
| Plasticising capacity | kg/h | 130 |
| Number of heating zone | zone | 4 |
| Extruder heating power | kw | 24 |
| Power of screw-bar machine | kw | 0.5 |
| Extruder driving power | kw | 37 |
| Hopper capacity | L | 5.5 |
| Number of heating zone | zone | 4 |
| Power of die heating | kw | 20 |
| Max die-pin diameter | mm | 350 |
| General power of machine | kw | 105 |
| Average energy consumption | kw | 50 |
| Power of the electric motor of oil pump | kw | 22 |
| Air pressure | Mpa | 1 |
| Using quantity of compression air | m3/min | 1.5 |
| Using quantity of cooling water | L/min | 40 |
Machine parts:
Moog parison thickness control system
Mould assembled into the machine platen
