A182F11 Bimetallic High Pressure Steam Traps PN63-100
Quick Details:
Design Pressure: PN100
Pressure: 1.0 - 6.5 Mpa
Material: Forged Steel A182 F11
Stand Water Hammer
Specifications:
Thermostatic Steam Trap
New SCCV System
Adjustable Dishcarge Temp.
Hot Condensate Forming Water Seal & No Steam Loss
Stand Water Hammer
Design Pressure: PN63,PN100
Pressure: 1.0 - 6.5 Mpa
Material: Forged Steel A182 F11
Temperature: 425
Working Media: Steam, Condensate Water
End Connection: Flange, Screw & Socket Welded
Thermostatic Steam Trap / Bimetallic Seam Trap
CFH1 , CFH2:
- 1. Tight shut-off and long service life by using SCCV system.
- 2. Efficient in energy saving---adjustable discharging temperature And effectively using the sensible heat of hot condensate.
- 3. Discharging temperature can be adjusted when the pipe net is in Operation. Can be installed in any direction.
- 4. Hot condensate exists just before the trap, forming a tight water Seal, which ensures no steam loss.
- 5. Withstands water hammer with outstanding performance of air Venting.
- 6. Operating without noise, benefiting for environmental protection.
- 7. Full open at the beginning of steam supplying, discharging cold condensate and air rapidly, which ensures quick start-up.
- 8. Stainless steel internals are resistant to corrosion and cavitation. Small in size and light in weight, easy maintenance.
Application:
this bimetallic steam trap is suitable for steam main pipe, steam tracer and container insulation of high temperature and high pressure, saturated steam and over heated steam, etc...
Note:
Insulation is not recommended for the pipe section 1meter before the trap and the trap itself.
