261KW 380V / 220V 99.6% Industrial Oxygen Plant With CE Certificate

Trade on HiSupplier, Worry Free Guarantee
Trading safety, secure your money, lower the risk, protect both buyers and suppliers
HiSupplier is a Chinese multinational company in U.S, it helps to coordination and order landing.
More ›
  • Product Details
  • Company Profile
  • Product Reviews

99.6% Air Separation Plant KDNO-800/200 Industrial Oxygen Plant With Low Energy

 

Annex 1. Plant design basis (need buyer’s confirmation)

 

Design point of Atmosphere

Ø  Atmosphere pressure

101.3kPa(A)

Ø  Atmosphere tempt.

30

Ø  Relative humidity

75%

Ø  O2 contained in air

20.95%O2

Atmosphere tempt.

Ø  Annual average tempt.

18.4

Ø  Max. Tempt.

40

Ø  Min. Tempt.

-1.8

Ø  Summer average tempt.

30

Ø  Winter average tempt.

7.5

Earthquake degree:

6 degree

Altitude:

50m

Impurity in air

Ø  CO2

≤350 ppm

Ø  SO2

≤0.44 mg/m3

Ø  H2S

≤2.3 mg/m3

Ø  CH4

≤5.2mg/m3

Ø  C2H2

≤0.03 ppm

Ø  CnHm (excluding C2H2)

≤5 ppm

Ø  Mechanical impurity

≤10mg/m3

Power condition

Ø  Low voltage power

380V/220V±5% AC 3 phases 4 ways

Ø  Frequency

50±0.5HZ

Ø  Installation capacity

261KW

 

 

Annex 2. Main parameter

 

Capacity and purity (out of cold box)

Item

Capacity(Nm3/h)

Purity

Pressure out of cold box

(MPa, G)

N2

800±5%

≤10ppmO2

0.6

O2

200±5%

≥99.6%O2

0.034

Production capacity condition(0,101.325Kpa)

Starting pressure

0.75MPa(G)

Plant running period

12 months

Starting time

24hours

Unit power consumption

0.32KWh/m3N2

 

 

Annex 3 Description of the process:

 

Ø  KDNO-800/200 air separation plant adopts the process of pressure nitrogen column with oxygen column, which is as following:

Ø  The plant adopts the process of relux of waste nitrogen expanding, as well as pressure nitrogen column and oxygen column. Raw air enters air filter for removal of dust and other mechanical impurity, then it goes to screw air compressor to be compressed to about 0.75Mpa. After that, it goes to precooling unit via oil filter and cooler to be cooled to 8-10,then goes to MS purification system for absorbing of moisture, CO2 and CnHm.

Ø  After purified, it goes to the main heat exchanger, which is cooled by cold reflux to saturated tempt. Then it flows to nitrogen rectification column, in where, air is separated to pure nitrogen and liquid air. Pure nitrogen is discharged from the top of column, then it is cooled to 12 by main heat exchanger. After that, it goes out of the cold box. Liquid air at the bottom of nitrogen column is cooled by cooler and throttled to the top of nitrogen column as cold source of condensed rising nitrogen. Air rich in oxygen in the condenser evaporator flows to the main heat exchanger to be reheated, most of which is scuked to turbine expansion. After that, air rich in oxygen returns back to the cold edge of main heat exchanger, in where, it is reheated to 12. Then it flows out of the cold box as the regenerative air of M.S. purifier. Part of liquid air is sucked form condenser evaporator at the top of nitrogen column flows to the top of oxygen column as relux after being throttled. Oxygen is sucked from the bottom of oxygen column flows out of cold box after being cooled and reheated by cooler and main heat exchanger.

Ø  For satety, please drain part of liquid oxygen periodically to avoid accumulation of hydrocarbon, especially acetylene.

 

Annex 4. Scope of supply

 

1. Oil injected screw compressor

1 set ( wind cooling)

Technical parameter(note:determined by final design)

Manufacturer

Atlas Copco or Ingersoll

Model

GA200

Discharge capacity

36.1m3/min

Discharge pressure

0.75MPa(G)

Motor power

200KW

SCOPE OF SUPPLY(note:determined as manufacturer’s final list)

Q.T.

Ø  Main motor

1

Ø  Compressor body

1

Ø  Electrical panel

1

Ø  Spare parts

1

Image (for reference, determined by final design)

 

 

 

2. MS purification system

1 set

Technical parameter(note:determined by final design)

Manufactory

siad

Model

HXK-2166/8

Air process

2166m3/h

Inlet pressure

Send message to this supplier
Mr. Yao junming
Tel: 86-571-87290354
Enter between 20 to 3,000 chatacters.
Contact Method
HANG ZHOU TAI LIAN CRYOGENIC EQUIPMENT CO., LTD.
M.12011202, BUILDING A, DONG FANG MANSION, Hangzhou, Zhejiang, China (Mainland)
Didn't find what you're looking for? Post Buying Lead or contact our customer service specialist for help!