Power Inverter 200W (CAR200)
Features:
1)Input protections:
Polarity reverse / Over and under voltage / Low battery Alarm and shut down
2)Output protections:
Short circuit / Overload / Over temperature
3)With power ON/OFF switch and LED indicator
4)Input and output fully isolation
5)Low power consumption(standby)
6)LVD meet EN60950 and E8 mark
7)EMC meet EN61000-6-1-3,EN55022
Specifications :
1) Max. continuous output power: 200W
2) Max. continuous output power 2H.: 225W
3) Surge capability peak output power: 400W
4) DC input static current (no load): ≤0.4AMP
5) AC output wave form: Modified Sine wave
6) Normal input voltage range: 11-15V / 21~30V
7) High voltage cut off level: >15V / 30V
8) Low voltage alarm: 10.6V±0.3V(DC12V) / 20.5V±0.5V(DC24V)
9) Low voltage cut off level: 9.5V±0.5V(DC12V) / 19.5V±0.5V(DC24V)
10) Output AC voltage : AC 115V±5% RMS / AC 230V ±5% RMS
11) Output frequency level: 60HZ±1Hz / 50HZ
12) Overload power range: 200W, 5-30%
13) Hi-pot test: PRI/sec, 1500V/AC 5mA/60s
14) Temperature protection: <65°C
15) Full load max. optimum efficiency: ≥90%
16) AC output short circuit protection: system shut down (no damage)
17) Fan run: Working with load
18) Fault warning: alarm beep
19) LED indicator:
a) Normal: green
b) Fault: red green
20) Fuse (spade type): 25Ax 1pcs
21) Dimensions (L x W x H): 110x 88 x 47mm
22) Environmental condition:
a) Operating temperature: -5~45°C
b) Operating relative humidity: 10-90% RH
c) Storage temperature: -10~50°C
d) Storage relative humidity: 10-95% RH