Electric Heating Knife Non Woven Cutting Machine PLC Servo Speed Control
Description:
Whole frame use the formed steel, surface and antirust processing, all machine bedplate must do antirust paint processing, frame welding is accurate in size, stent of appropriate reinforcement, belt pulley and the transmission part of the central accuracy, ensure the smooth operation of the machine. Equipment in coiling before the start of the installation blowing device, and is equipped with automatic winding rod device to reserve the circular knife cutting device location, so that in the future, installation and use.
Equipment production process: raw materials roll, rubber roller with transportation, electric knife automatic cutting, counting, automatic bar, blowing, receiving volume, artificial transfer to take off a tank, an electric heating wire pressure off, automatic stripping and finished product.
Specification:
|
Model |
Qx1-r1600 |
|
Cutting Device |
1600 mm |
|
Maximum diameter |
1000 mm |
|
Winding Mode |
The Way To Receive The Volume, And The Special Pneumatic Pressing Device, Technology And Domestic Leading |
|
Cutting Raw Materials |
Spunlace Cloth, Non-Woven, Meltblown, Jakob, Spunbond Nonwovens And Can Be Classified Textile Materials, Such As Paper Cutting, Comes Materials And The Field Test. |
|
Control Program |
Plc Servo Speed Control |
|
Parameter |
Color Touch Screen |
|
Weight |
About 2500kg Specific Weight Depending On The Machine Configuration |
|
Production Speed |
60-80 m / Min |
|
Compressed Air |
Customer Owned |
|
Customization |
Specific Contact Sales Manager |
|
Power |
50hz 3.5kw 380v |
Features:
1 equipment requirements: cutting, counting, winding, pressure off, stripping, at the same time.
2 machine door width 1600 mm, the maximum diameter of 1000 mm.
3 equipment with heating constant temperature control system, power 7 kw
4 the roller belt continuously variable transmission device can be adjusted to the rolling speed, the roller is used to roll the roller! .
5 raw material is placed in the control of the magnetic particle strength to control the volume transport, with 1 gasoline rose axis.
6 the maximum speed of the machine can be adjusted to 80 m / min (but this speed is not suitable for practical production, according to the characteristics of raw material)
7 the air pressure of the winding roller and the pressure adjusting device. With 3 stainless steel shaft winding.
8 in a certain range, the maximum diameter of the product can be adjusted within a certain range of 200 mm (200mm).
9.The device is equipped with 6 high precision aluminum alloy roller with conveying and wrinkle.
10 stepless speed regulation, sub - cutting speed, online electric heating cutting device 10 sets, can adjust the cutting size.
11 equipment is equipped with a cylinder 6.
12 the device uses frequency conversion control, electrical wiring is reasonable, safe, clean, easy to operate.
13.The machine is equipped with adjustable tension device 2, adjustable tightness of rewinding device configuration.
