Instruction
Rake mine winch is mainly used for metal, chemical industry, building materials and other mines and other mineral mines underground pit or open do handling or packing operation, can also be used in the coal mine working face scraper content, etc.2 JPB - 30 rake mine winch is only applicable to horizontal and dip Angle is not more than 50 degrees slope scraper, cannot serve as lifting equipment.Drivers can manipulate with the hand, beside the winch can also from the winch with button for a few meters to tens of meters away from the distance.
Advantage
A major part of the rake mine winch has reduction gear, main drum, drum, controlling device, steel rope guide, and motor.These parts are both inside and outside the shell, shell parts is one who has a good rigidity, already up to protect, support, and bear all the load.It bolted on connected to the base of two ways.
Application
Binocular winch has a main drum (installed on the right side, close to the side of the motor), a pair of drum (on the left side).Three drum winch has a main drum (in the middle), two deputy drum (on the left and right), three drum winch also can hold two main drum (on the right, and center), a pair of drum (left) in each drum has a corresponding control device and a steel rope guide.
Principle
After the motor starting, through the gears and double reduction, drive shaft rotation, planetary gear reducer gear drives the two again.When internal gear is not stop, can free rotation, in the main drum scraper and Yin force under the action of wire rope, such as press the lower right hand manipulation, make internal gear on the right rein, the corresponding main drum in the planetary gear and samsung led by the rotating rope, Joe rake mine.Deputy drum under the traction of wire rope, rope rotating.Loosen the right wing, press the left hand, put the brakes on the left internal gear, the corresponding pair of drum in the planetary gear and samsung led by rotating rope, drag scraper quick returns, while the main drum steel wire rope traction rope, alternating press, panasonic and right-handed, scraper or reciprocating movement to complete the rake mine work.
