Dali 26-40W Dimmable LED Panel Light UL8750, ENEC, GB19510.14,GB19510.1 approval
Description:
Dali Dimmable LED Light Panels
(1) Output current level selectable by DIP S.W
(2) 180~295VAC input only.
(3) Dali dimmable LED Panel Light Built-in active PFC function.
(4) Protections: Short circuit / Over voltage / Over temperature.
(5) Cooling by free air convection Dali dimmable LED Panel Light.
(6) Dali dimmable LED Panel Light Fully isolated plastic case.
(7) Classpower unit, no FG.
(8) Built-in DALI interface and push dimming function.
(9) Optional 12V/50mA auxiliary output.
(10) IP20 design.
(11) Logarithm or linear dimming curve selectable.
(12) Temperature compensation function by external NTC.
(13) No load power consumption <0.5W.
(14) Power supplies synchronization function up to 10 units..
(15) Suitable for indoor LED lighting applications.
(16) 3 years warranty.
Applications:
Sitting room;
Bedroom;
dining room;
corridor;
hotel,etc.
Suggestion: the installation height of droplight, the lowest point shall be not less than 2.2 meters off the ground.
The Dali led panel light consists of the led panel light, DALI led power supply, DALI systems. With these, you can control all of the led panels in the building.
Features:
|
Product Name |
Dali 26-40W Dimmable LED Panel Light |
Frequency Range: |
47-63Hz |
|
Power |
26-40W |
Efficiency(Typ.): |
91% |
|
Output current level |
Selectable by DIP S.W |
DALI Standards: |
Comply with IEC62386-101, 102, 207 |
|
Voltage |
180 ~ 295VAC 254 ~ 417VDC |
Certificate |
UL8750, ENEC, GB19510.14,GB19510.1 |
Specifications:
|
Model |
CLP-NDALI-(26-40)W |
|
Rated Power |
26-40W |
|
Selectable Current |
350-1050mA |
|
DC voltage range |
2-100V |
|
Ripple Current |
±5% |
|
Ripple & Noise(max.) |
700mVp-p |
|
No-load Output Voltage(max.) |
110V |
|
Current Accuracy |
±5% |
|
Setup, Rise Time |
500ms, 80ms / 230VAC at rated power |
|
Hold Up Time |
16ms/230VAC at rated power |
|
Voltage Range |
180 ~ 295VAC 254 ~ 417VDC |
|
Frequency Range |
47 ~ 63Hz |
|
Power Factor(Typ.) |
PF0.975/230VAC, PF0.96/277VAC at rated power |
|
Total Harmonic Distortion |
THD will be lower than 20% when output loading is 75% or higher |
|
Efficiency(Typ.) |
91% |
|
AC Current(Typ.) |
0.23A/230VAC |
|
Inrush Current(Typ.) |
COLD START 20A(twidth=260μs measured at 50% Ipeak) at 230VAC |
|
Leakage Current |
<0.5mA / 240VAC |
|
Short Circuit |
Constant current limiting, recovers automatically after fault is removed |
|
Over Voltage |
110 ~ 130V |
|
Over Temperature |
Shut down o/p voltage, re-power on to recover |
|
Auxiliary Power(optional) |
12V @ 50mA for driving fan; Tolerance ±5% |
|
Temp.Compensation |
By external NTC(not provide with the power supply) |
|
Working Temp. |
-30 ~ +60 (Refer to "Derating Curve") |
|
Working Humidity |
20 ~ 90% RH non-condensing |
|
Storage Temp.,Humidity |
20 ~ 90% RH non-condensing |
|
Safety Standards |
UL8750, ENEC, GB19510.14,GB19510.1 approved |
|
DALI Standards |
Comply with IEC62386-101, 102, 207 |
|
Withstand Voltage |
I/P-O/P:3.75KVAC |
|
EMC Emission |
Compliance to ENEC;Class C;GB17625.1,GB17743 |
|
Warranty |
3 Years |
