Different with ceramic tile thermal insulation board with high decorative performance
Specifications:
|
Product |
Performance |
|||
|
Metal Fluorocarbon Painting Decorative Insulation Board |
Decoration Layer |
Ultrathin stone veneer decorative board |
Multifunction, light weight, high strength, easy to install and processing |
High quality, low cost, insulation, good decoration performance |
|
|
EPS insulation layer (Grade B1) |
Heat conductivity ≤0.041. volume-weight :18kg / m³ with the tensile strength:110--120kpa; volume-weight 20kg / m³ with the tensile strength :140kpa. |
||
|
XPS insulation Layer (Grade B1) |
Heat conductivity ≤0.030. Volume-weight 25--45kg / m³ & tensile ≥150kpa. Strong compressive resistance. 30-40 years average using life. Excenllent structure load-bearing performance . |
|||
|
Polyurethane insulation board (Grade B1) |
Hard polyurethane with low thermal conductivity, good thermal performance. When the hard polyurethane with the density of 35 ~ 40kg / m3, thermal conductivity is only 0.018 ~ 0.024w / (m.k), equivalent to half of the EPS, is the lowest heat conductivity of all the insulation materials . |
|||
|
TPS insulation board (Grade B1) |
Heat insulation thermal conductivity is 0.060W / (m · k) ,it has good tensile compressive strength , impact resistance and stability ; its compressive strength reaches 150-500KPa |
|||
|
|
Appearance quality: smooth surface, without prejudice practical scars, stains damaged. Combustion performance: non-combustible. Thermal load contraction temperature: 643 degrees. |
|||
|
Phenolic Foam Board(Grade B Grade A) |
Not be melt at high temperatures ,not be softened, with low smoke, non-proliferation flame resistance, flame penetration, There is no distortion, no burning ,no fire, being placed 10 minutes at 1400 , can effectively prevent the flames and smoke spread |
|||
Weidi Decorative Insulation Board final product facing layer performance
(varieties: solid color/metal/stone/wood grain/special effects, etc.)
|
Test Item |
Detection standard and requirements |
The third party test results |
|
|
Coating thickness(μm) |
GB/T13452.2-2008-10 |
≥30 |
199 |
|
Coating adhesion(MPa) |
GB/T5210-2006 |
≥0.3 |
1.7(0.8-2.7),100%A |
|
Hardness(Pencil) |
GB/T6739-2006 |
≥4H |
6H No scraping damage |
|
Abrasive resistance(750g/500r),Suitable grinding wheel type:CS-10 |
GB/T1768-2006 |
|
0.003 |
|
Solvent resistance wiping(Butanone,100times) |
HC/T-3792-2005 Appendix |
No undercasing |
Meet the requirement |
|
Acid-resistance(5%HC1 liquor,24H) |
GB/T9274-1998 |
No blistering,No Falling off,non-discolouring |
No Change |
|
Alkali resistance |
GB/T9274-1998 |
No blistering,No Falling off,non-discolouring |
No Change |
|
Abrasion performance |
HC/T3793-2005- 4.1/4.3 |
≥5 |
12 |
|
Stain resistance |
GB/T9757-2001 Appendix A |
≤5 |
5 |
|
Scrub resistance |
GB/T9266-2009 |
≥10000 |
>10000 |
|
Oil resistant(Immerse in engine oil SE15W-40 24H) |
GB/T9274-198888 |
No blistering,No Falling off,non-discolouring |
No Change |
|
Alkali burnout resistance(72H) |
JG/T210-2007 |
|
No abnormalities |
|
Salting-out resistance(144H) |
JG/T210-2007 |
|
No abnormalities |
|
Weather resistance |
GB/T1865-2009,GB/T1766-2008 |
Artificial climate ageing and radiation exposure |
4000Hrs after testing,Dulling≤3Grade, Discoloration≤2Grade |
Description:
Decoration Veneer Layer:Ultrathin Nature Stone
Carrying Layer:Calcium silicate board;Cement pressure plate;Aluminium plate;
Insulation Layer:TPS panel ; XPS panel ; EPS panel ;
Ultra-thin stone decorative insulation board, also called as exterior wall thermal insulation insulation composite panels, composite insulation composite panels, granite stone, and so on, is composed by the thin natural stone and insulation material. According to the decorative surface it can be divided into paint and non - paint, and the non-paint can be mainly divided into ultrathin stone material and ceramic tile, etc.
Applications:
|
Business Organizations |
It is widely used in office building,hotel, High-end residential and other building’s decoration and insulation project.
|
Competitive Advantage:
1. Multi-function;
2. Light weight,;
3. High strength;
4. Highly decorative
5. Low cost, easy process etc
