Vertical Slurry Pump Application and Features
They are designed for delivering abrasive, large particle and
high density slurries. These pumps have no need of any shaft seal and
sealing water. They can also be operated normally for insufficient
suction duties.
Wet parts of type SP pump are made of abrasion-resistant metal.
All parts of type SPR pump immersed in liquid are lined with rubber
outer liner. They are suited to transport non-edge angle abrasive
slurry.
The type with
"L" is a sump pump of extension shaft series, which is suited for the
working condition of deeper level. The guide bearing construction is
added to the pump on the basis of the standard pump, so the pump is with
both more steady operation and wider application range, but flushing
water should be attached to the guide bearing.
The sump pump is a vertical centrifugal slurry pump, immersed in the liquid, the pump inlet is vertically downward, and the outlet is vertically upward on the other side of the pump.
The pump is mainly composed of lower filter screen, pump body, impeller, shaft, guard plate, bracket and other parts.
The upper part of the pump is supported by a bearing; the pump is installed under the liquid without any shaft seal and shaft seal water, and it can work normally under conditions of insufficient suction.
The flow parts are made of wear-resistant materials, which are used to transport abrasive, coarse particles, and high-concentration slurry.
It is mainly suitable for conveying corrosive, coarse particles and high-concentration slag slurry. It is widely used in metallurgy, mining, coal, electric power, building materials, environmental protection and other departments.
The transmission type of this pump is BD and DC, namely belt drive and direct drive.
The depth of immersion in the liquid can be determined according to the actual needs of users within the standard size range.
Seen from the direction of the pump suction port, it rotates counterclockwise.
Shijiazhuang Jiemu Machinery Equipment Co., Ltd is a modern pump company specializing in production, research and development, sales and service. We have been in the centrifugal pump industry for more than 20 years. We have a modern standard pump room and a processing workshop with a variety of advanced processing equipment. The whole process from casting to assembly is one-stop closed-loop production. The team of experienced production R&D engineers is professional and efficient. Choose us, professional team, professional equipment, trustworthy.
China Gempump Main products:
1.Slurry pumps
2.Gravel pumps
3.ZJQ submersible slurry pumps
4.Inline pumps
5.Multi-stage pumps
6.Split case pumps
7.Sewage pumps
8.Mixed flow pumps
9.Self priming pumps
10.Spare parts
Vertical Sump Pump Clean Water Performance Table:
Type | Allowable Mating Max. Power (Kw) | Range Of Performance | Impeller | ||||
Capacity/Q | Head /m | Speed /rpm | Max Efficiency /% | No. of Vanes | Diameter /mm | ||
m³/hr | |||||||
40PV-GP | 15 | 19.44-43.2 | 4.5-28.5 | 1000-2200 | 40 | 5 | 188 |
65QV-GP | 30 | 23.4-111 | 5-29.5 | 700-1500 | 50 | 5 | 280 |
100RV-GP | 75 | 54-289 | 5-35 | 500-1200 | 56 | 5 | 370 |
150SV-GP | 110 | 108-479.16 | 8.5-40 | 500-1000 | 52 | 5 | 450 |
200SV-GP | 110 | 189-891 | 6.5-37 | 400-850 | 64 | 5 | 520 |
250TV-GP | 200 | 261-1089 | 7.5-33.5 | 400-750 | 60 | 5 | 575 |
300TV-GP | 200 | 288-1267 | 6.5-33 | 350-700 | 50 | 5 | 610 |
Application:
SV(R) slurry pumps are mainly used for handing corrosive, coarse particles and high density slurries , and are widely used in sewage treatment, metallurgy, mining, mineral processing, dredging, de-watering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material...etc. various industrial sites. For different duties, pump is named as High head pump, High pressure pump, Mineral processing pump, Mill discharge slurry Pump, Booster pump, Feeding pump, Tailing pump,Transfer pump Thickner Underflow Pump, De-watering screen pump, Pressure pump, Concentrate pump
