7.5KW Shelf Steel Roll Forming Machine Cr12 Cutter Blade With Servo Feeding
Main composition of the machine
The machinery line consists of 5.0 tons manual de-coiler, material flattening and straightening,servo feeding, hydraulic punching,material guiding, main roll forming machine, hydraulic cutting system ,run-out table, control cabinet with PLC
Technical parameters
1. Matching material: GI
2 Thickness:0.4-0.8mm
3. Main motor power: 7.5KW
4. Forming speed: 8m/min(including punching and cutting)
5. hydraulic station power: 11 KW
6. Quantity of stands:20 stands
7. Shaft Material and diameter: 75mm, material is 40cr
8. Material Of The Stations: Guide rail style
9. Tolerance: 3m+-1.5mm
10. Way Of Drive: 1.5 inch single chain
11. Controlling system: PLC
12. Total weight: about 12 Tons
13. Voltage: 380V/ 3phase/ 50 Hz
14. Size of the machine: L*W*H 10m*2.0m*1.6m
Size of the line: L*W*H 25m*2.5*1.6m
15. Material of forming rollers: 45# steel, coated with chromed treatment
16. Material of cutter blade: Cr 12Mov mould steel with quenched treatment 58-62
18. The rollers surface is mirror polished.
19. The punching mould material is Cr 12Mov.
Working Flow
5.0 tons hydraulic de-coiler –material straightening and flatting—servo feeding—hydraulic punching—material guiding—roll forming—hydraulic cutting—panels to the collecting platform— Finish
Cutting and the control cabinet
Cutting:
(1) Cutting motion: The main machine automatically stops and then cutting. After the cutting,
the main machine will automatically start.
(2) Material of blade: GCR12with heat treatment
(3) Length measuring: Automatic length measuring
(4) Tolerance of length: +/- 1.5mm
Control Box: Brand Panasonic
(1) Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase (this is can depend on customer request)
(2) Automatic length measurement:
(3) Automatic quantity measurement
(4) Computer used to control length & quantity. Machine will automatically cut to length
and stop when required quantity is achieved
(5) Length inaccuracy can be amended easily
(6). Control panel: Button-type switch and touch screen
(7) Unit of length: millimeter (switched on the control panel)
