High Speed Automated Double Layer Roll Forming Machine 8-12m/min
Technical parameters
1. Main motor power: 7.5KW motor with cycloidal pin wheel reducer
2. Forming speed: 8-12m/min
3. Hydraulic station power: 3.0KW
4. Quantity of stands: about 18
5. Shaft Material and diameter: 75mm, material is 40CR
6. Material Of The Stations: Guide rail style
7. Tolerance: 3m+-1.5mm
8. Way Of Drive: 1.0 inch single chain
9. Controlling system: PLC
10. Total weight: about 8 Tons
11. Voltage: 380V/ 3phase/ 50 Hz
12. Size of the machine: L*W*H 9 m*2.0m*1.4m
13. Material of forming rollers: Gcr 15, coated with chromed treatment
14. Material of cutter blade: Cr 12 mould steel with quenched treatment 58-62
15. The rollers surface is mirror polished.
16. Color:ISC color
Main composition of the machine
The machinery line consists of 7.0 tons hydraulic de-coiler, material guiding, forming roller system, hydraulic cutting system ,run-out table, control cabinet with PLC
Working Flow
Hydraulic de-coiling ---guiding- -roll forming- length sizing –cutting the panel-panels to the collecting platform— Finish
Packing List details
7 tons hydraulic de-coiler x1 set
Main roll forming machine x1 set
Control box x1 set
Hydraulic station x1 set
Hydraulic cutting system x1 set
Run-out table x2 sets
Cutting mould x1set
Tools and components x1 set
Cutting and the control cabinet
Cutting:
(1) Cutting motion: The main machine automatically stops and then cutting. After the cutting,
the main machine will automatically start.
(2) Material of blade: GCR12with heat treatment
(3) Length measuring: Automatic length measuring
(4) Tolerance of length: +/- 1.5mm
Control Box: Brand Panasonic
(1) Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase (this is can depend on customer request)
(2) Automatic length measurement:
(3) Automatic quantity measurement
(4) Computer used to control length & quantity. Machine will automatically cut to length
and stop when required quantity is achieved
(5) Length inaccuracy can be amended easily
(6). Control panel: Button-type switch and touch screen
(7) Unit of length: millimeter (switched on the control panel)
