10mm-100mm XPS extruded polystyrene foam board/ Heat Insulation
Specifications:
|
Item |
Performance |
|
|
Heat Conductivity W/(m.k) |
≤0.030 |
|
|
Water Absorbing Capacity (g/) |
≥500 24hrs Immersion |
|
|
Impact Resistance/J |
Normal (P Type) |
≥3.0No Cracking |
|
Reinforced(Q Type) |
≥10.0No Cracking |
|
|
Wind Resistance (Kpa) |
No less than the project designed value of wind load design |
|
|
Freezing and thawing Resistance |
30 freeze-thaw cycles, No hollowing, shedding in protective layer; Tensile bond strength Between the protective layer and the insulation layer ≥0.1Mpa, damaged to the insulation layer |
|
|
Wet Steam Flow Density (g/·h) |
≥0.85 |
|
|
Watertightness |
No water infiltration inside of the protective layer (Sample) |
|
|
Weather Resistance |
Facing layer no blistering, peeling, The protective layer without hollowing or off, no water seepage cracks |
|
Description:
XPS (extruded polystyrene) insulation board, is a new insulation material, which is a high quality foam
product characterized by smooth skin with a closed - cell structure that looks like a mass of uniform
bubbles with common walls between them. There are few, if any, voids between the cells, top and bottom
skin.
Applications:
|
Business Organizations |
Indoor and outdoor heat and sound insulation. |
Competitive Advantage:
⇒ Energy saving, for reduced energy bills and reduced CO2 emissions
⇒ High insulation efficiency for maximum thermal comfort
⇒ High compressive strength
⇒ Water resistant and unaffected by moisture
⇒ Lightweight
⇒ Easy to handle
⇒ No dust
⇒ Easy to recycle
