Low Rotating High Torque CNC Milling Spindle Compatible with All Engraving Software
Instructions for use
1) Before driving, cooling water for grinding workpiece can’t be in the front end of the spindle cover, to
prevent the front bearing cover slot inlet burning motor and bearing. the motor must not enter the water,
after turned on of the motor, when you live in grinding the workpiece to open the grinding of workpieces
coolant. First off the workpiece coolant shutdown, and then close the spindle motor.
2) In use, must first connect the cooling water pipe, make spindle connect cooling water and then start.
3) Before driving, turned by hand spindle. If sensory block is not flexible, you should troubleshoot, and then
check the direction of rotation of the spindle from the spindle end to see if the match should rotate
counterclockwise power wiring should be changed to make it consistent.
Features:
1. Compatible with all engraving software, and USB connection is optional.
2. High safety and performance
3. With advanced DSP digital control system, TEMEI CNC wood router can process both 2D and 3D engraving.
4. Adopts imported lineal guide rail which are more precise, durable and less noisy.
5. Y axises are driven by dual stepper motors and transmitted by gear rack, fast and steady, up to 18m/min.
6. Various power of spindles.
7. Breakpoint memory function is available. So wood routers will not be affected even with power failure or
tools are broken.
8. Vacuum absorb table can absorb the wood tightly, and dust collector will keep your table clean and less
dust in the workshop. Both of them are optional.
Specifications:
Spindle mode:NYM110-9-21Z/3.5
Spindle parametric: Overall size(mm):
Frequency:800Hz D:110
Rotating speed:9000-21000rpm D1:85
Power:3.5Kw L:270
Voltage:380V L1:37
Electric current:8A L2:31
Connect mode:ER25
Tool holder’s diameter:1-16mm(Factory standard: 2 fillings)
Cooling mode:water
Mandrel runout:≤0.008mm
Taper hole of spindle runout:≤0.003mm
Lubricating mode: grease
Bearings mode:2*7007 2*7004
Weight:17.5KG
Description:
Depth of parallelism within 0.002mm and Perpendicularity within 0.002mm are necessary. The GDZ High Speed
Motor Spindle researched and developed by our company has low noise and high accuracy characteristics.
Our high speed motor spindle utilizes hydraulic pull weights imported from German to measure the spindle’s
pull accurately. It adopts two-pole to six-pole motor-driven system and the spindle is made by the nickel
chromium molybdenum alloying steels through standard heat treatment program to reach the
requirement of high accuracy and stability. Balance test should use the computerized balancer machine to check the precise balance of spindle
with full speed.The assemble and install step is adjusted according to standard correction program when
tightening the nut and is tightened by torque wrench within criterion, which make us not to correct the
spindle by adjust the nut. The spindle leaving the factory is promised to run all for an integral test process
so that the time of machine tool manufactors’ running time and machine tools delivery time could all be
shortened.Assemble and install area’s temperature is controlled by the thermostatic air conditioner within
accurate fit tolerance.
Applications:
Applicable scope: This product is suitable for Engraving machine or Engraving and milling machine and Lock
industry. It is mainly used for the circular carving and drilling and milling of the hardware, glassworks and
woodworks.
Product features:
High rotating speed used for engraving and milling or fine machining. This product has wide application.
Low noise, little vibration, good stability, high processing precision
Infinitely variable speed transmission for frequency changer with wide speed range
The front end of the bearing use the water-cooling equipment , the cooling effect of the spindle is better. The durable years of the Bearings gets more
longer.
After-sale protection:
Bearing warranty last for half a year,Machine quality assurance last for a year.
