We are seeking global co-operation agents for our products.
Characteristic
1 automatic control of sealed door interlocking
The electric door is convenient and reliable, and the sterilization procedure begins to automatically lock with anti clip hand function. All sterilization procedures are completed, the door is automatically released, effectively prevent misuse.
2 microcomputer automatic control, LCD screen display
Real-time display of temperature, humidity, pressure, sterilization time, residual processing data and working state.
3 negative pressure sterilization
Sterilization process control in the negative pressure sterilization, EO gas without leakage.
4 automatic control wet, wet system
Humidity sensor detected by humidity, can not reach the set value, automatic humidification, to ensure the effective use of humidity.
5 automatic memory recovery function
When an unexpected power outage, will stop when the sterilizer automatic memory state, restore the power supply automatically from the original state to resume operation.
6 automatic protection of a number of alarms
Abnormal in the operation of the program will automatically alarm, and automatically execute the corresponding protection.
7 whole process print record
Using a micro printer, print out the whole process of sterilization process every minute of the data, can do permanent preservation.
8 automatic dosing
Domestic first sterilization indoor puncture technology, to ensure the full use of gas leak, more safe and reliable.
9 the use of explosion-proof fire retardant heating system, more safe,
we are seeking global co-operation agents for our products.
Description of project
Section in the chart | Project name | Standard operating conditions (setting central value) |
A | Preconditioning | Temperature :47℃ |
Humidity :40%RH | ||
Time needed : 540min | ||
B | Air removal | Pressure achieved :-70±5kPa |
C | Humidity injection | Time needed :2 min |
D | Conditioning | Time needed :30min |
E | EO injection | Weight of EO injected :16 kg |
F | Gas keep | Time needed :360min |
G | EO removal | Pressure achieved :-70±5kPa |
H | Flushing | Pressure achieved :-15~0kPa |
Flushing times :3 times | ||
Temperature of water tank of sterilzer | Temperature :54℃ | |
I | Aeration | Time needed :12h |
Temperature :40℃ | ||
Air change time :10min/once | ||
Air change interval :10min | ||
Section in the chart | Project name | Standard operating conditions (setting central value) |
A | Preconditioning | Temperature :47℃ |
Humidity :40%RH | ||
Time needed : 540min | ||
B | Air removal | Pressure achieved :-70±5kPa |
C | Humidity injection | Time needed :2 min |
D | Conditioning | Time needed :30min |
E | EO injection | Weight of EO injected :16 kg |
F | Gas keep | Time needed :360min |
G | EO removal | Pressure achieved :-70±5kPa |
H | Flushing | Pressure achieved :-15~0kPa |
Flushing times :3 times | ||
Temperature of water tank of sterilzer | Temperature :54℃ | |
I | Aeration | Time needed :12h |
Temperature :40℃ | ||
Air change time :10min/once | ||
Air change interval :10min | ||
