Pvc Plastic Pipe Extrusion Line Drainage Electrical Control System , Pipe Making Machinery
Quick detail:
| 1 | High output,high efficiency |
| 2 | easy to operate |
| 3 | dust-free cutting mode |
PVC pipe making machine has the following features:
1. Extrusion Equipment of PVC pipe making machine :Single screw extruder takes the new and efficient BM Screw,and has the higher screw speed, yield and plasticizing capacity...nose or spiral-flow nose,with a uniform material,convenient adjustment to eliminate extrusion fusion line and so on.
2. Vacuum shaping devices of PVC pipe making machine :vacuum spray tank,spray cooling tank or efficient cooling tank, and all water contact parts made of stainless steel material.
3. Traction machine of PVC pipe making machine :two claw-type or rubber belt crawler tractor in order to adapt to different pipe production requirements.
4. Cutting machine of plastic pipe making machine :No dust rotating knife.
5. Stacking devices of PVC pipe making machine :automatic turn plate or roller-type stacking devices, small-diameter pipe can be configured duplex winder according to customer requirements duplex winder.
6. Electrical control system for a variety of options (eg: PLC automatic control system),good production speed,stability,and the control system is simple and easy to operate.
Specifications:
|
SJZ51/105 |
Screw diameter |
51/105mm |
|
Machine barrel and screw material |
38CrMoAlA nitriding treatment |
|
|
Main motor power |
18.5KW |
|
|
heating sections and power |
machine barrel 4 sections12KW |
|
|
center height |
1000mm |
|
|
cooling fan power of machine barrel |
0.25KW×3 |
|
|
Contactor and breaker |
Schneider Electric or Siemens |
|
|
Vacuum calibration tank |
Vacuum pump power |
4*1KW |
|
Water pump power |
4KW×2units |
|
|
Cycloidal-pin gear speed reducer |
1.5KW |
|
|
Pipe scope |
16-50mm |
|
|
Haul off(2 claws) |
Motor power |
4KW |
|
Lift Cutter |
Saw motor |
2.2KW |
|
blower |
1.5KW |
|
|
The range of cutting pipe diameter |
16-50mm |
|
|
Stacker |
Length |
5,000mm |
