Vibration sieve work principle
Its vertical motor, which is installed eccentric hammers on the top and bottom, is regarded as a vibratory source. The eccentric hammers change rotation into horizontal, vertical and inclined movement, and then pass the movement to the sieving surface. Adjusting the phase angle on the top and bottom can change trajectories of the materials on the sieve.
Vibration sieve features
1. High efficiency, compact design and durability, any powder, mucus can be screened.
2. It is easy and simple to change screen. And it is easy to clean.
3. Screen is not blocked, the powders do not not fly, it can be screened to 400 mesh or 0.028mm.
4. Impurities and coarse material can be discharged automatically, then continuously operating.
Vibration sieve technical parameter
| Model | Motor Power | Diameter | Voltage | Speed | Volume | Layer |
| DH-1000-1s | 0.75KW | 920mm | 380V/220/240V | 1440r/min | 1160*1160*810 | 1 |
Dahan vibration sieve installation and commissioning:
1. There should be a stabilized base for equipment. When the equipment is installed on the ground or cement, it need not install bottom screw. When the equipment install on steel structure frame, screws should be fixed on the steel structure frame, and the steel structure should have a certain thickness.
2.Before the equipment is shipped from factory, it has installed screen,customers can change screen by yourselives during the using.
3. Before starting, customers should first check degree of fastening bolt and whether mouth position connect with stock receiver. Observe whether vibration motor can move and check whether each layer sieve is fastened.
4. Before the vibration sieve access electrical control panel, firstly, check the electrical control panel. After line connected, observe whether vibration motor rotation direction is clockwise. Wether pperation is normal and there is no noise.
5. Adjusting vibrating motor phase angle to fit all kinds of material screening.
