| 1.AC Input Voltage Range | AC 110V/ 230V | |
| 2.Battery | Leadacid /Lithium | |
| 3.AC Input Frequency | 47Hz – 63Hz | |
| 4. Max power | Max output volatge multiply by Max charging current | |
| 5.Output current range | 50%-100% of max charging current | |
| 6.Max noise | 60db | |
| 7.Max efficiency | ≤95% | |
| 8.Temperature compensation | ±5mV/℃.Monobloc(based on 25℃) | |
| 9.Storage temperature(℃) | -45℃～+60℃ | |
| 10.Working conditions (℃) | -20℃～+55℃ | |
| 11.AC Plug | UK,USA,European,AU | |
| 12.DC plug | Clip,Anderson Plug,O-ring | |
| 13. AC Cable | 1.5M | |
| 14.DC Cable | 1.5M | |
| 15.IP | 65 | |
| 16. Charge Time | 6-10 hours (Standard 8 hours) | |
Features:
| 1.Automatic Temperature Compensation |
| Collecting the inner temperature of the battery and outside by thermal electron,the charger will adjust the charge voltage automatically.Make sure the battery do not underfilling and over charge. |
| 2. Automatic Equalizied Charging |
| Assure the each cell of the battery pack equalized charged,no owe charge or over charge.Make sure the battery pack life span. |
| 3. Overheat Protection |
| Automaticllly adjust charging current and enhance the spinning of the fan when the temperature is over 75℃; recover to normal charging when the temperature reach the ideal level. |
| 4. Short Circuit Protection |
| Identification and action-taken automatically of the internal control circuit when short-circuit happened. |
| 5. Reverse Polarity Protection |
| Not starting charging when the polarity is reversed. No damage to the battery and charger. |
| 6. Low Input Voltage & Over Voltage Protection |
| When the input voltage is lower(15%) or higher(15%) than the normal charging voltage range, the self-protection function is activated. Once is input voltage is noraml, the charger get back to work automatically. |
