Waterproof Black Cansiter LED Diving Light 3000lumen 100m Diving
PRODUCTION SPECIFICATIONS:
DLN DH30 canister dive light is designed exclusively use for underwater.This special diving light can make it under water max 150 meters.DLN DH30 canister dive light use 3 ultra bright Cree U2 LED and the max brightness is 3000 lumens.Three lighting modes (High - Low - Strobe ) can meet your different illumination needs. Magnetic switch makes the scuba divng light more easy operation and valuable illumination diving experience.
PRODUCTION DESCRIPTION:
- Designed for the professionals using the canister dive light and primary diving lights.
- New designed and strengthened dive circuit,super stand by.
- Micro -computer chip low voltage warning and protection.
- Efficient Cree LED chip with life span over 50,000 hrs.
- Durable aircraft-grade aluminum.
- Magnetically controlled switch
- Waterproof IP - 68
- Premium Type III hard-anodizing
- Anti-roll,slip resistant body design
- Good-man handle for easy carry.
| Model | DH30 caister dive light |
| Bulb | CREE XM-L U2 LED*3 (Max 3000 Lumens) |
| Modes | High> Low>Strobe> off |
| Runtime | High: 210 min, Low: 420 min, Strobe: 300 min |
| Color temperature | 6500K |
| Reflector | Glossy Aluminum reflector |
| Lens | 8mm Polycarbonate Board |
| Body material | Durable aircraft-grade aluminum |
| Angle of light beam | 8° hot spot, 110° periphery |
| Surface treatment | Premium Type III hard-anodizing |
| Color | Black |
| Battery | 26650 Li- ion battery *3 in canister |
| Circuit Protection | With battery over-discharging protection, polarity reversing protection |
| Operation voltage | 9V to 14V |
| Waterproof | 100 meters underwater |
| Dimensions | light head: 84mm (length) *82mm (dia. of head); canister: 233(length)*36mm (dia. of body) |
| Weight | 1000 grams (without batteries); 1300 grams (with batteries) |
| Underwater Weight |
710 grams (with batteries) |
| Impact resistance | 1.5M |
BATTERY INSTALLATION
- Remove the top cover of the canister by turning counter-clockwise.
- Remove used batteries and replace with fresh batteries as shown by the polarity stickers.
- Mount the cover by turning clockwise.
BATTERY CHARGING
1.Plug the charger in the wall power socket, the indicator light is green in the free-load status.
2.Put the battery in the slot of the charger.
3.The indicator light is red if the battery is not fully charged; it will turn green after fully charged.
4.Take out the fully charged battery and use them in the canister.
ON/OFF
Push the switch forward to activate the light.
The switch will go back to original position automatically.
MODES CHANGING
Successive switch ON-OFF within two seconds to cycle through high, low, strobe.
SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged o-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the o-ring sealing surfaces.
KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.
