Three Layers Touch Screen Plastic Thermal Shock Chamber For Environmental Test
Description:
Three Layers Touch Screen Thermal Shock Environmental Test Chamber For Plastic is used to test the capability of material structure or composite material to withstand the continuous environmental changes between extremely high temperature and low temperature during a short period, and therefore understand the chemical changes or physical damages caused by expansion from heat and contraction from cold in the shortest possible time. It is applicable to metals, plastic, rubber, electronics amongst other materials. The test result can be used as a reference or basis for produce improvement.
Features:
Thermal Shock Environmental Test Chamber is divided into three sections: the high temperature chamber, the low temperature chamber and the testing area.
- The color touch panel control system was made in Japan can display Chinese / English. The big size liquid-crystal LCD has been adopted.
- High formula memory capacity may be set to 120 patterns. The maximum cycle setting is 9999cycles. The maximum setting of each section is 999 Hrs 59 Mins.
- Provide with RS-232C communication interface device, capable of controlling / editing/ recording in the linkage with the computer and two set dynamic connection point and convenient application.
- Both 2 zone and 3 zone shocks can be chosen.
- All equipment is fully automatic, and all process are precisely controlled with P.L.C.’S.
- Of any part of the malfunctions, the machine will automatically shuts down and a warning light switches on.
- Machine can be shut down automatically in case of electrical power instabilities
Standards:
- GJB150.5A-2009
- GB/2423.13-2002
- GJB360B-2009
- GB2423.1-2008/IEC608-2-1-2007
- GBT2423.2-2008
- GB/T 10589-2008
- GBT 11158-2008
Technical Parameters:
| Model |
CZ-I-42 (A~C) |
CZ-I-80 (A~C) |
CZ-I-150 (A~C) |
CZ-I-252 (A~C) |
CZ-I-450 (A~C) |
|
Internal Dimensions WxHxD(cm) |
40x35x30 | 50x40x40 | 60x50x50 | 70x60x60 | 80x75x75 |
|
External Dimensions WxHxD(cm) |
140x180 x145 |
148x190 x155 |
160x200 x175 |
175x210 x187 |
190x220 x200 |
| Temperature Range |
(150°C~A:-45°C;B:-55°C;C:-65°C);(High temperature zone:+60°C~+150°C; Low temperature zone:-10°C~-65°C;) |
||||
|
Heating Time (regenerative) |
RT~200°C about 35min | ||||
| Cooling Time (storage) | RT~-70°C about 85min | ||||
|
Temperature Response Time / Time Change |
≤5min /≤10sec | ||||
|
Precision Temperature Control / Distribution Accuracy |
±0.5°C /±2.0°C | ||||
|
Inner and Outer Materials |
The whole set is SUS 304# stainless steel treated with mist. Inner box is stainless steel |
||||
| Insulation Materia |
Heat-resistance high-density aluminum silicate fiber cotton or PU foam insulator materials |
||||
| System | P.I.D+S.S.R+ Micro-computer balanced temperature control system | ||||
| Cooling System |
Semi-hermetic double-stage compressor (water-cooled type) /Hermetic double-stage compressor (air-cooled type) |
||||
|
Security Protection Devices |
Non-fuse breaker, high and low pressure protective switch of the compressor, refrigerator high-pressure protective switch, failure warning system, electronic alarm |
||||
| Accessories |
viewing window (special order), shelves (freely adjustable, 2 pcs), power-on test cable port, castor, horizontal support |
||||
| Power | AC380V 50HZ/60HZ 3¡Ó | ||||
|
Weight (approximate) |
700Kg | 900Kg | 1200Kg | 1400Kg | 1900Kg |
| control panel | South Korea"TEMI" or Japan¡äs "OYO" Brand Optional | ||||
| compressor | "Tecumseh" Brand/ Bizter Brand | ||||
