Aging Environmental ASTM UV Test Chamber with PID Temperature Control
Specifications
1 ASTM UV-lamp Tester
2 high quality with good price
3 blackboard thermometer
4 prompt delivery
5 PT-100 sensor
Standard:
ASTMG154.GB/T16422.3-1997 and other standards
Controller
Import controller, separately control irradiation temperature, condensing temperature, irradiation time,
condensing time, spraying time, working cycle ( imported LCD touch screen controller TEMI880)
Technical Parameter
|
Model |
CZ-UV-1 |
|
Sample frame dimension |
493×290 (mm) W×H total four pcs |
|
Sample dimension |
80×290 (mm) W×H Each sample frame equips with 6 pcs |
|
External dimension |
About 1300×1480×550 (mm) W×H × D see as below picture |
|
Centre distance among tubes |
70mm |
|
Centre distance between sample surface and tube |
50±3 mm |
|
Tube length |
1220mm |
|
Tube watt |
40W |
|
Tube use life |
Above 1600h |
|
Tube quantity |
four pcs in both front and back, total eight pcs |
|
Weight |
80kg |
|
Maximum watt |
5 KW |
|
Maximum current |
17A |
|
Power supply information |
1)AC 220V single phase protective grounding; voltage fluctuation range 10% 2)Frequency fluctuation range:50±0.5 HZ 3)Power supply method: TN-S or TT method 4)Grounding resistance of protection ground wire4Ω 5)User should equip with relevant capacity air switch or dynamic switch on the installation site, and the switch must control this machine only. When the electrified test sample is put in the test chamber, the power of the test sample should be connected with extra power, don’t use the power of this machine; |
