njection Machine Run Specification
MODEL | ITEM | RUN-220 | |||||
Clamping Unit | Unit | A | B | C | |||
Clamping Unit Size | 2200/520 | ||||||
Clamping Force | KN | 2200 | |||||
Platen Stroke | mm | 500 | |||||
Space Between Tie-bar | mm | 520*520 | |||||
Mold Thickness | mm | 200-550 | |||||
Ejector Stroke | mm | 175 | |||||
Ejector Force | KN | 61.6 | |||||
Mold Location Recess Dimater | mm | Φ160 | |||||
Injection Unit | Injection Unit Size | 1117 | |||||
Screw Diamter | mm | 50 | 55 | 60 | |||
Screw L/D | L/D | 23.9 | 21.7 | 19.9 | |||
Injection Volume | CM3 | 500.7 | 605.8 | 721.0 | |||
Injection Weight(PS) | g | 455.6 | 551.3 | 656.1 | |||
Injection Speed | g/s | 164.4 | 198.9 | 236.7 | |||
Injection Pressure | Mpa | 223.0 | 184.3 | 154.9 | |||
Max. Charge Speed | RPM | 189 | |||||
Heater Zone | N | 4+1 | |||||
Heater Power | KW | 16 | |||||
Nozzel Radiu | mm | SR15 | |||||
Others | Max.Hydraulic | Mpa | 16 | ||||
Normal Motor Power | KW | 22 | |||||
Servo Moter Power | KW | 30 | |||||
Machine Dimensions(L*W*H) | m | 5.9*1.5*2.0 | |||||
Machine Weight(about) | T | 6.6 | |||||
.Electronic & Electrical Components
ITEM | BRAND | COUNTRY |
Controller | TECHMATION | Taiwan |
Electronic Ruler | MIRON | |
Relay | SCHNEIDER | France |
Breakers | SCHNEIDER | France |
Photoelectric Switch | MOOT | USA |
Single-phase Breaker | SCHNEIDER | France |
Three-phase Breaker | SCHNEIDER | France |
.Hydraulic Unit
ITEM | BRAND | COUNTRY |
Hydraulic Motor | MOOT | ITALY |
Pump | Aikele | Germany |
Directional Control Valve | NORTHMAN | TAIWAN |
Back Pressure Valve | NORTHMAN | TAIWAN |
CHX Series Plastic Injection Machinery Adopting five-pivot point double-elbow hydraulic machinery clamping devices, for energy saving.....
plastic injection machinespecifications:Usage:Used for contour machining various hot plasticity plastics(nylon,ABS,372,PP, polystyrene),widely used for the injection shaping of car instrument panel,electron,
telecommunications,daily use products,stationary and so on.
KD type plastic injection machine take the dsign theroy of back mould united structure for reference,
which has the charateristics of super material selected,advanced structure,beautiful appearance,easy to
operate,
convinent to regulate
and maintain,matched with realiable elecricity control.
1.Flexible servo motor control system,respond time only 0.05s
2.super servo controller,servo motor and pressure transducer are closed cycle control,which has high precise repetition.
3.Ease the impact of open and close mould,extend the machine part and mould life.
4.The fever of the system are lower than the troditional plastic injection machine,save the consuption of cooling water.
5.Extend the service life of the oil system,lower the maintenance cost.
6.Lower noise.
