Tungsten Carbide Wear Parts Circular Tipped Saw Blades for Wood / Paper Cutting
Description of Carbide Tipped Saw Blades:
1. Body: Alloy steel body with customer specified grade
2.CNC machining with good finish edge.
3.Tipped with high quality carbide saw tips.
4. Sandwiche Soldering Flake.
5. Long working time.
6. Different quality grade choose.
7. Artwork design service.
Advantages of Carbide Saw Blade:
100% raw material.
Sintered in HIP Furnace
Size standard as per your requirements
Professional suggestion on products
Feedback within 24 hours
ISO9001: 2008 certificate.
Fully adopted in advance technology and equipment.
Professional manufacture for tungsten carbide items with 20 years experience.
Fully adopted in advance technology and equipment.
Quality Control System and strict inspection.
Size Chart of Carbide Tipped Saw Blades:
|
TYPE |
Dimensions(mm) |
Remarks |
||
|
Outer Diameter |
Inner Diameter |
Thickness |
||
|
SB60 |
60 |
20 |
0.5-3 |
This kind of products widely used in the cutting of rubber, paper, wood and other materials. Different saw blades with special design and sizes used for different applications. We welcome you to bring forward your detailed requirements. |
|
SB70 |
70 |
30 |
0.5-3 |
|
|
SB80 |
80 |
35 |
1-3 |
|
|
SB90 |
90 |
40 |
0.5-3.5 |
|
|
SB100 |
100 |
42 |
1-5 |
|
|
SB110 |
110 |
45 |
1-5 |
|
|
SB120 |
120 |
50 |
1-6 |
|
|
SB200 |
200 |
55 |
1-5 |
|
|
SB250 |
250 |
65 |
1-6.5 |
|
|
SB380 |
380 |
100 |
1-6 |
|
|
SB400 |
400 |
150 |
1-6.5 |
|
|
SB415 |
415 |
168 |
1-6 |
|
Material Grade for Saw Tips:
|
Grade |
Density |
Bending |
Hardness |
Mechanical and introduction |
International |
|
g/cm 3 |
MPa |
HRA |
|||
|
YG6A |
14.9 |
1850 |
92 |
Fine grain alloy, good wear resistance. Semi finishing of chilled cast iron, non-ferrous metals alloys, semi-finishing and finishing of hardened steel, alloy steel. |
K10 |
|
YG6 |
14.8 |
2450 |
90.5 |
High wear resistance, high bending strength, used for disc saw blades in electrical line. |
K20~K30 |
|
YG8 |
14.7 |
2320 |
89.5 |
The use of high strength, impact resistance, shock resistance higher than SH25, but the wear resistance and cutting speed is low. For cast iron, non-ferrous metals and alloys, non-metal material low speed roughing. |
K20 |
|
YG10X |
14.5 |
2200 |
91 |
Fine grain alloy, good wear resistance. Used for processing hard wood, veneer board, PCB,PVC and metals. |
K30 |
Picture show:
