Features
1. Stable output level and adjustable continuously.
2. Increases indoor signal coverage up to 200 sqm more .
3. Supports multiple users simultaneously.
4. LED indicate and judge to signal level of uplink and downlink.
5. Decreases dropped or missed calls.
6. Full-Duplex Communication Mode.
7. Easy to set up – comes complete with everything you need.
8. Extends phone battery life (uses less power when signal is stronger).
9. CE authentication certificated.
Specification
Frequency Range | Uplink: 1920 - 1990MHz, Downlink: 1990-2180MHz | |
Model | GA-RS3G-1 | |
Output Power | Uplink : 18-22dBm | Downlink : 18-22dBm |
Gain | Uplink : 53-57dB | Downlink : 58-62dB |
Ripple Pass Band | ≤5dB | |
Power Supply AC | 100-240V , 50/60Hz ; DC: 5V , 1A | |
Power Consumption | ＜5W | |
Impedance | 50ohm | |
VSWR | ≤1.8 | |
Other Specification | ||
I/O Impedance | 50Ω | |
RF Connector | N-Female | |
Operation Temp. | -10 - +50 °C | |
Humidity | ≤95% | |
Dimensions Approx. | 150×100×25mm | |
Weight Approx. | 1.5kg | |
System contains
1. Outdoor Antenna ( LPDA Antenna, Yagi Antenna , Panel Antenna ,Omni Antenna or etc . )
2. Indoor Antenna ( Panel Antenna , Ceiling Antenna,Rubber Antenna,etc . )
3. 10-20meters 50ohm coaxial cable . ( suggest better low loss cable to avoid the gain loss . )
4. Mounting Accessories Set
5. AC Power Supply ( provide Europe Standard and American Standard )
6. Manual
7. What else you can choose : more power dividers ( splitters ) , more indoor antennas , more cables ,etc .
Steps that describe the work of Repeater
1) The outside antenna receives the signal from the nearest mobile base station.
2) The outside antenna sends the received signal to the installed Repeater through the coax cable.
3) The Repeater accepts the low signal and amplified it.
4) The amplified signal goes to the inside antenna through the connection coax cable.
5) The inside antenna send the amplified good signal to your mobile phone.
Steps for Installation
1). Mount the Outdoor Antenna. Choose a location for the Outdoor Antenna using your cell phone to determine the area of strongest signal. For example, on window or on roof.
2). Mount the Booster. Choose a place where you want to create a Cell Zone.
3). Use the coaxial cable to connect between the outdoor Antenna and the Booster.
4). Mount the indoor Antenna. Choose a place indoor Antenna where you need signal.
5). Use the coaxial cable to connect between the Booster and the indoor Antenna.
6). Connect the Booster to the provided power supply and plug into a power outlet.
