JBK5 400v to 220v Machine Tool Control Voltage Transformer Copper Winding
Introduction:
JBK5 machine tool control transformer is the upgrade version of JBK3 transfomer. It takes advantages of many domestic and foreign control transformers, advanced terminal block is applied in it. Connections of the inside components are attached by gas tungsten arc welding so that the structure is reliable and compact.
- accurate
- reliable
- efficient
- small
- safe
- practical
Working conditions:
3.1 Ambient air temperature limit shall not exceed + 40 , average no more than 24 h + 35 .
3.2 Ambient air temperature limit not less than -5 ;
3.3 altitude does not exceed 2000 m.
3.4 air relative humidity in the surrounding air temperature is + 40 less than 50%, at lower temperatures, may have a higher relative humidity.
3.5 no explosion hazard of medium, and medium to a corrosive action on metals, and damage the insulation gas, and conductive dust.
3.6 there was no significant shaking shock and vibration.
Specifications
Features
|
Low loss |
|
Low noise |
|
High efficiency |
|
Low partial discharge |
| Strong mechanical strength and short-circuit withstand ability |
| Operation reliability |
| Easy maintenance |
| Pretty outline and compact structure |
| 100% guaranteed no leakage |
Installation drawings:
control power,working light of general electric appliance and mechanical
equipment of various trades, and power of signal lamp with frequency AC
50-60Hz ,input voltage doesn't exceed 500V.
