Adjustable W2113324411 Automobile Control Arms Mercedes E Class 2002 Year
|
Item Name |
Suspension Arm / Control Arm |
|
Material |
Steel |
|
Color |
OEM standard |
|
Car make |
Mercedes-benz E class W211 |
|
Brand |
Air suspension system |
|
Warranty time |
1 year |
|
Port |
Guangzhou zhou / Shen zhen / Ning bo |
|
Factory directly |
Yes |
|
Packing |
Neutral packing |
|
Delivery date |
Normally 10--20 days after order confirmed |
* We have the advanced machine, skilled employee to guarantee the nice quality. Supply full range of air suspension for car :
- Air shock absorber / air suspension shock
- Air compressor pump
- Mercedes-Benz air suspension repair kits
- BMW air suspension repair kits
- Audi air suspension repair kits
- Land Rover air suspension repair kits
- Hose crimping machine and dies
- Air suspension kits /air suspension spring
- Hydraulic shock absorber
- Air suspension valve / air distribution block
- Power steering pump
- Automobile control arms
- Transmission filters
- Steering rack
* What is automobile control arm ?
The control arm helps position the vertical center line of the wheel and allows for up and down movement of the wheel in relation to the vehicle's body.
*Symptoms of Wear or Failure
Suspension may make a squeaking and/or knocking noise when going over bumps
Vehicle may wander
Uneven tire wear
*Related Repair Advice
In many cases, the control arm must be replaced in order to replace the bushings.
Replacing the control arm may affect the alignment's settings. We recommend a four-wheel alignment when a control arm is replaced.
* How to get the right item :
Method 1 : Show me the chassis No. and engine No.
Method 2 : Show me the OEM No. or Parts No.
Method 3: Show me the photo
|
We have models as below |
|||
|
3 series |
E30 E36 E46 E90 F30 |
C-Class |
W202 W203 W204 |
|
5 Series |
E34 E39 E60 E63 F10 |
E-Class |
W124 W210 W211 W212 |
|
7 Series |
E32 E38 E65/E66 F01 F02 |
GL |
X164 X204 |
|
X1 |
E84 |
ML |
W163 W164 |
|
X3 |
E83 F25 |
R |
W251 V251 |
|
X5 |
E53 E70 |
S |
W140 W220 W221 |
* More information about control arm
In automotive suspension, a control arm, also known as an A-arm, is a hinged suspension link between the chassis and the suspension upright or hub that carries the wheel.
The inboard (chassis) end of a control arm is attached by a single pivot, usually a rubber bushing. It can thus control the position of the outboard end in only a single degree of freedom, maintaining the radial distance from the inboard mount. Although not deliberately free to move, the single bushing does not control the arm from moving back and forth; this motion is constrained by a separate link or radius rod.
This is in contrast to the wishbone. Wishbones are triangular and have two widely spaced inboard bearings. These constrain the outboard end of the wishbone from moving back and forth, controlling two degrees of freedom, and without requiring additional links.
Most control arms form the lower link of a suspension. A few designs use them as the upper link, usually with a lower wishbone. The additional radius rod is then attached to the upper arm.
Not only we are able to supply large quantity order, but also we can organize small quantity complex order as well.
* Contact information :
Contact number: Ivy Lee
Skype: pnairsuspension
Mobile number / WHATSAPP / WECHAT: +86 13609036725
