working principle
Through digital instrumentation and temperature sensor is connected to control the temperature, air circulation mode using hot air, hot air circulation system is divided into horizontal and vertical. It has been accurately calculated, the wind source is driven back by the blast wind wheel motor operation via electric heaters, hot air duct into the oven to the studio, and the use of the air intake duct after becoming once again circulating air source heating use, so can effectively improve the temperature uniformity. As the door in use by the switch, air circulation system quickly restored to operational status temperature. Oven structure and working principle:
Structure of industrial ovens
Industrial oven inside and outside the two-tier structure, the housing of sheet steel angle between the inner and outer double shell filled with fibrous material. Fibrous material industrial oven used mostly aluminum, it can play the role of insulation, forming a reliable insulation. Industrial oven is equipped with hot air circulation system and temperature measurement and control system.
Principle of industrial ovens
Industrial ovens at work, the operator to obtain industrial oven interior temperature value through the instrument and temperature sensor, operated by the control system. Industrial oven hot air circulation heating method, compared with conventional cooling heating, has a better gas flow, can speed up industrial oven drying speed of the material.
Hot air circulation system consists of industrial oven air motors, wind turbines and electric composed, motor driven blower wheel sends cold wind, cold air through an electric heating device to carry heat through the duct into the industrial oven oven studio.
Industrial hot air circulating oven system helps improve the uniformity of air temperature in the process of industrial ovens switch box door transportation of materials, the temperature value will be affected are changed, the uniformity of the hot air circulation system is conducive to the rapid recovery in the largest degree temperature operating conditions.
Model | Inner size W×D×H mm | Outer size W×D×H mm | electric power KVA | Outer electric 50/60Hz AC | Tray Layer | Door | vacuum degree
|
SVAO-1 | 300×300×300 | 550×500×1800 | 3 | 1∮ 220V/380V | 2 | 1 | 1 TORR |
SVAO-2 | 400×400×400 | 650×600×1900 | 4 | 1∮ 220V/380V | 4 | 1 | 1 TORR |
SVAO-3 | 500×500×500 | 750×800×2000 | 5 | 1∮ 220V/380V | 5 | 1 | 1 TORR |
SVAO-4 | 600×600×600 | 840×800×2000 | 7 | 3∮ 220V/380V | 6 | 1 | 1 TORR |
Customized
Capacity is determined sizes, to meet production needs, high productivity, the crawler can choose industrial ovens. What we say drying production line, tunnel furnace, bake. Low productivity, or experiment with a small oven can select custom processing.
Temperature
Select more than 10 degrees to the actual use of high temperature. According to process requirements, calculate the temperature difference between the actual requirements to ensure the baking results. Example: If the temperature is 150 degrees, 220 degrees, 360 degrees, 440 degrees, according to the maximum design temperature of 500 degrees to do. 4 temperature, if it is the same product. The best selection of thyristor control. Different products, when used at low temperatures, the temperature difference is slightly larger. The practical effects of 150 degrees and 220 degrees, there is no good low-temperature oven. Use the oven temperature to 500 degrees, 150 degrees difference in temperature than the baking temperature of 250 degrees oven 2 to 5 degrees higher. Equipment manufacturers will have to see the quality is good or bad. Oven divided into low (0-250 degrees), the temperature 250-600 degrees), high temperature (600-1500 degrees) over 1200 degrees recommends the use of carbon silicon rod is heated, can choose according to the product process requirements.
Shipping
(1) By sea; (2) By air; (3) By expressage.(DHL,FEDEX,UPS,TNT etc.)
Custom packaging:We also packing acording to customers' requirement.
We can make the prouducts according to your requirement , no matter what country are you from.
Contact information:
Company: Dongguan City jinyao precision equipment Co.,ltd
Address: Jingfu Road No 36, xiabian village, changan town , Dongguan City, Guangdong Province
Tel:86-769-85422549
Fax:86-769-85424793
Website:http://www.jinyaodrying.com
The image of company:
Our products:
Our company already has 30 years experience to empolder and produce. Our always keep these spirit: innovation; customer first; constantly strive for perfection; and good service.
Our product widely used in electronic product, resistance material, automatic produce industry and press production, which is widely used to dry and bake some industry materials.
Features:
Reasonable design
High-efficiency
Low consumption, energy saving
Easy to maintain
Easy to operate
Certification
Our company already has 30 years experience to empolder and produce. Our always keep these spirit: innovation; customer first; constantly strive for perfection; and good service.
Our product widely used in electronic product, resistance material, automatic produce industry and press production, which is widely used to dry and bake some industry materials.
Features:
Reasonable design
High-efficiency
Low consumption, energy saving
Easy to maintain
Easy to operate
service we can supply:
SUPPORT
We can not only provide the good machines, but also wholeheartedly provide the comprehensive for our clients. The series of professional technology service will make you have an excellent product experience.
After-sales service support
After we signed the purchase contract and have a certain reputation guarantee, we will contact the professional group that responsible for ship bookings, commodity inspection, commercial invoices, packing list, insurance policy and so on, in order to provide you the perfect goods trading services, until the product you purchased properly to your hands.
Technological support
Yutsai has been largely adopting new technologies, new techniques and high-tech equipments. And Yutsai also has strict and effective quality control system.
The component we use is our own design products.
About Us
Dongguan city Jinyao precision Equipment co., LTD is one of Enterprise combining develop, produce and sale. Established in 1980, already have 30 years experience to produce: precision Hot-air drying oven; IR/UV deliver drying equipment; environmental test equipment; printing machine; automation industrial equipment etc.
Our company always keep the aims that provide high quality product; quick service attitude and the great design. We keep the company spirit that has advance technology and high quality team. Our product receive a lot of client trust, and stand firmly front of others.
Dong Guan YUTSAI precision device enterprise LTD. is registered capital achieve ten million RMB. It has 4800 square meters factory. More than three million RMB fixed assets. Value of output achieve 24million RMB each year.
We has the steady domestic clients such as: FOXCONN, HuohYow, FU BROTHRT industrial company, HUAXIN technology company, PUYAO group etc. It's all about more than 500 company include Domestic ,foreign and military enterprises. We also has the long-term relationship with Thailand, India and England.
The company toward higher, farther, more perfect operating system. the Taiwan Head Company as the axis, and we make efforts in mainland market development.
