Product brief
This product is oil liquid,belong to semi-synthetic micro emulsive cutting fluid,consist of mineral oil,lubricants,anti-rust agent,organic surface active agent and other additives.Suitable for processing cast iron, carbon steel, alloy steel, copper alloy, aluminum alloy, and is widely used in all kinds of machine tools, machining center of cutting, grinding process. Liquid supply for single machine and concentrated supply for central cooling system
Product features:
1, Oil liquid,is a microemulsion extreme pressure cutting fluid,consist of lubricating oil,EP anti-wear agent, anti-rust agent and other additives.
2, Excellent lubrication,cooling,cleaning and anti-rust performace
3, Products can improve the surface finish of workpiece, ensure the workpiece and machine tool online antirust requirements
4, Good corrosion resistance, foam inhibiting and emulsion stability of long service life, reduce maintenance costs
5, Waste liquid treatment is easy.
Technical parameters
|
Item |
Quality index |
Test method |
||||
|
15~35 Original solution appearance |
Red brown oil liquid |
GB/T6144 5.2GB/T6144 5.2 |
||||
|
5%Diluent(5%) |
Phase state |
Clear to microemulsion |
Visual |
|||
|
pH |
9.010.0 |
GB/T 6144 5.5 |
||||
|
Stability (15~35, 24h) |
Soap |
0.5 |
SH/T0365 appendixA |
|||
|
Oil |
No |
|||||
|
(15~35, 4h) Salt allowance |
No phase separation |
SH/T0365 appendixC |
||||
|
mL/10min Defoaming ability |
≤2 |
GB/T6144 5.6 |
||||
|
55±2 Corrosion test,full immersion |
45# steel |
24h |
GB/T6144 5.8 |
|||
|
LY12 Aluminum |
8h |
|||||
|
Red copper |
8h |
|||||
|
H62,Brass |
8h |
|||||
|
35±2 Anti-rust test |
First grade grey casting iron |
Single piece |
24h |
GB/T6144 5.9 |
||
|
Lamination |
8h |
|||||
Instructions:
1,Recommended concentration:cutting:1:10~1:20; grinding: 1:20~1:25,Use concentration can be adjusted according to processing requirements
2,Use new fluid method:before using the new liquid,clean the storage tank and piping circulation,with 1%~2% concentration diluent (and adding bactericide ),at last add the productt evenly circulation can be used
3,Tank liquid supply or maintenance: when need supply tank need supply,should add water with corresponding percentage of original solution
4,Working liquid should be kept clean and ventilated, timely remove iron and oil and other impurities
5,If machine downtime for a long time,should air circulation
