13CrMoV42 is an alloy structural steel. 13CrMoV42 has a higher oxidation resistance and heat resistance. Creep rupture strength limit and the value of this steel is very close, and has a high plasticity in the case of persistent tension; the process of steel with good weldability, but before welding to be preheated to 300 ℃, required in addition to the stress after welding deal with.
16CrMo44 Correspond steel:
GB 12Cr1MoV
13CrMoV42 chemical composition(％):
C: 0.08 ~ 0.15
Si : 0.17 ~ 0.37
Mn: 0.40 ~ 0.70
Cr: 0.9～1.2
Mo: 0.25～0.35
V:0.15～0.30
13CrMoV42 Mechanical Properties:
Tensile strength σb (MPa): ≥490
Yield strength σs (MPa): ≥245
Impact energy Akv (J): ≥71
Round bar : Diameter : 1mm-2000mm
Square bar :Size: 50mm * 50mm～600mm *600mm
Plate steel/flat bar :Size: Thickness: 0.1mm～800mm Width: 10mm to 1500mm
Tube/pipe: Size: OD: 6-219mm WT: 1-35 mm.
Cold-rolled sheet: Thickness: 2-5mm Width:1000mm Length: 2000mm
Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm
Length: We can supply any length based on the customer's requirement.
13CrMoV42 Application:
13CrMoV42 is mainly after normalizing and tempering used for the manufacture of high-voltage equipment temperature does not exceed 570 ~ 585 ℃ superheated steel pipes, ducts, coils and other appropriate forgings.
We serve you with our honesty, integrity, and professionality .
Contact sales:
Website : http://www.firsteelplate.com/
Email : seedsteel@hotmail.com
Tel : +86-371-55031185
Fax: +86-371-86220366
