Monel 400 / UNS N04400 / 2.4360 Nickel Alloy Strip ASTM B127
1. Grade: Monel 400
2. Process: VIR - VAR - ESR - Forging - Cold Rolling - Semifinished - Finished
3. Delivery Condition: Cold rolled
4. Surface Condition: 2B
5. Thickness: 0.1-6.35mm
6. Length*Width: Custom design
6. Specification: ASTM, ASME, GB, JIS, GOST, DIN, etc.
7. Packing: Plywood case, Bundle
Monel 400(UNS N04400/2.4360) is a nickel-copper alloy with high strength and excellent resistance to a range of media including seawater, dilute hydrofluoric and sulfuric acids, and alkalies.
Alloy 400 containing about 30–33% copper in a nickel matrix has many similar characteristics of commercially pure nickel, while improving upon many others. Addition of some iron significantly improves the resistance to cavitation and erosion in condenser tube applications. The main uses of alloy 400 are under conditions of high flow velocity and erosion as in propeller shafts, propellers, pump-impeller blades, casings, condenser tubes, and heat exchanger tubes. Corrosion rate in moving seawater is generally less than 0.025 mm/year. The alloy can pit in stagnant seawater, however, the rate of attack is considerably less than in commercially pure alloy 200. Due to its high nickel content (approx. 65%) the alloy is generally immune to chloride stress corrosion cracking. The general corrosion resistance of alloy 400 in nonoxidizing mineral acids is better compared to nickel. However, it suffers from the same weakness of exhibiting very poor corrosion resistance to oxidizing media such as nitric acid, ferric chloride, cupric chloride, wet chlorine, chromic acid, sulfur dioxide, or ammonia. In unaerated dilute hydrochloric and sulfuric acid solution the alloy has useful resistance up to concentrations of 15% at room temperature and up to 2% at somewhat higher temperature, not exceeding 50°C. Due to this specific characteristic, alloy 400 is also used in processes where chlorinated solvents may form hydrochloric acid due to hydrolysis, which would cause failure in standard stainless steel.
Monel 400 Typical applications are valve and pump parts, propeller shafts, marine fixtures and fasteners, electronic components, chemical processing equipment, gasoline and freshwater tanks, petroleum processing equipment, boiler feedwater heaters and other heat exchangers
Chemical Composition
| Grade | Ni% | Cu% | Fe% | C% | Mn% | C% | Mn% | Si% | S% |
|---|---|---|---|---|---|---|---|---|---|
| Monel 400 | Min 63 | 28-34 | Max 2.5 | Max 0.3 | Max 2.0 | Max 0.05 | Max 1.0 | Max 0.5 | Max 0.024 |
Specifications
| Grade | UNS | Werkstoff Nr. |
|---|---|---|
| Monel 400 | N04400 | 2.4360 |
Physical Properties
| Grade | Density | Melting Point |
|---|---|---|
| Monel 400 | 8.83 g/cm3 | 1300°C-1390°C |
Mechanical Properties
| Alloy | Tensile Strength | Yield Strength | Elongation |
|---|---|---|---|
| Monel 400 | 480 N/mm² | 170 N/mm² | 35% |
