OLT Gpon Mini Optical Line Termination Network Terminal 4000 m Ma5608T

 
OLT Gpon Mini Optical Line Termination Network Terminal 4000 m Ma5608T 
 
OFS-MA5608T olt equipment epon/gpon onu
 
MA5608T Positioning

• Deployed at the remote end, including the base stations (BSs) and outdoor environments
• 2 U high, and supports a maximum of two service boards
• Connected to MxUs or ONTs and used in FTTB/C and FTTH scenarios
• Connected to xDSL terminals and phones and used in the MSAN/DSLAM scenario

Product Features
Integrated Access
 
Optical Access

• Supports a split ratio of 1:128.
• Support small form-factor pluggable (SFP) optical module of Class B+ or Class C+ and XFP optical module, which can be used in different scenarios.
• High-density 48 single-fiber bi-directional or 24 two-fiber bi-directional GE/FE P2P optical access is supported.
• Supports the high-performance and large-capacity control board SCUH. In active/standby mode, SCUH supports 20 Gbit/s switching bandwidth for each slot. In load sharing mode, SCUH supports 40 Gbit/s switching bandwidth for each slot. And provides 960G switching capacity (doubles performance capacity), improving access user bandwidth.

Copper Access

• The xDSL ports works with the ADSL terminal unit-remote end (ATU-R) or the VDSL terminal unit-remote end (VTU-R), which can provides the highest-density 64 channels of xDSL access and 48 channels of POTS access.
• Far-end crosstalk (FEXT) is one of key factors affecting the performance and stability of the VDSL2 system. The MA5603T supports the vectoring feature. Vectoring uses vectors to solve FEXT of VDSL2 lines so as to improve bandwidth and performance of multi-pair VDSL2 lines. It effectively decreases crosstalk for short-distance lines (shorter than 1 km). The rate of a single VDSL line can be increased about 50%-90% within 800 m. Provides higher bandwidth and more types of services over existing VDSL2 lines after the rate for a single VDSL2 user is increased.

Full Service Access

• Supports the High-Performance Multicast Service. The device employs the multicast technology to provide IP video services, including live TV and QVoD, for carriers. By introducing the multicast technology, the network device can manage, control, and forward IP video services and thus meets carriers' requirements for provisioning IP video service.
• The MA5600T/MA5603T/MA5608Thas completed its interoperability test with all mainstream NGN/IMSs.
  • Connection to the NGN/IMS network through SIP or H.248, implementing the VoIP service (including the voice, fax, and modem services).
  • The MA5600T/MA5603T/MA5608T supports reconstruction of traditional voice devices such as the N*64K private line device and ISDN PRI PBX, implementing the ALL IP architecture.
• Implements base station access solution by using MA5600T/MA5603T/MA5608T (OLT)+MDU. And the MA5600T/MA5603T/MA5608T supports clock synchronization in the base station access scenario.
• The MPLS PWE3 provides the E2E reliability and quality assurance for the service.

Integrated Capability of Access and Convergence
NE Convergence
The MA5600T/MA5603T/MA5608T features powerful access and convergence capability. In the downstream direction, it supports cascading to other devices through the GE or 10GE port. In the upstream direction, it supports connection to the IP/MPLS network through the GE or 10GE port. It also supports dual homing to the BRAS through direct connection.
Centric Management for GE Remote Extended Subracks in FTTB or FTTC Scenarios
The MA5600T/MA5603T supports the centric management for GE remote extended subracks in FTTB or FTTC scenarios so that the network features higher scalability. The GE remote extended subrack feature uses new technologies such as VDSL2 and vectoring on the copper line network to deploy ultra-broadband networks more conveniently and rapidly.
 
Quick Details
 

 
Packaging & Delivery
 

 
Boards supported by the MA5608T
 

 
Dimensions and weight of the MA5608T
 

 
Running environment parameters of the MA5608T