BTS-15V3A Specification Sheets
Battery testing sysem Description | Battery testing sysem Product Specification | ||||
AC Input | AC 110V±10% 50Hz | ||||
Power | 5160 | mW | |||
Resolution | AD: 16bit; DA: 16bit | ||||
Input Impedance | ≥1MΩ | ||||
Voltage | Measuring Range | Charge: 75mV~15V | Discharge: 75mV~15V | ||
Discharge Min Voltage | 2.5V | ||||
Accuracy | ± 0.1% of FS | ||||
Stability | ± 0.1% of FS | ||||
Current | Range | Charge: 15mA~3A Discharge: 15mA~3A | |||
Accuracy | ± 0.1% of FS | ||||
Stability | ± 0.1% of FS | ||||
Power | Output Power Per Channel | 45W | |||
Stability | ± 0.2% of FS | ||||
Time | Rise Time | 20ms (0~Full Range) | |||
Step Time | ≤ (365*24) hour/step | Time Format 00:00:00 (h:min:s) | |||
Data Acquisition | Intervals | Time interval Δt:(1s~60000s) | |||
Voltage interval ΔU: (75mV~5V) | |||||
Current interval ΔI: (15mA~3A) | |||||
Frequency | 10Hz | ||||
Charge | Modeof Operation | CCC, CVC, CC & CVC,CPC,CC&CCC | |||
End Conditions | Voltage, Current, Test Time, Capacity, -△V | ||||
Discharge | Modeof Operation | CCD, CPD | |||
End Conditions | Voltage, Current, Test Time, Capacity, -△V | ||||
Pulse | charge | CCC ,Constant power mode | |||
Discharge | CCD,Constant power mode | ||||
Min Pulse Width | 500ms | ||||
Automated Switch | Automated swith from charge to discharge for each pulse | ||||
End Condition | Voltage, Test Time | ||||
DCIR testing | Support DCIR testing | ||||
Cycle | Loop Measure Range | 1~65535 times | |||
each channel of the analyzer has independent constant-current and constant
voltage source, which can be programmed and controlled by computer software.
And all the data can be exported to EXCEL and PDF sheets from DATA Analyze software.
