Humidity Indicator Portable Dehumidifier Removable Front Grill DH100 500mL / Day
1. Brief introduction of air dry home dehumidifier:
The dehumidifier is made up of compressor,heat exchanger,fan,water tank,chassis
and controller.Its working principle:Firstly,the moist air was pumped into the machine
by fan.Then,the moist air become drops flow into water tank by heat exchanger.At
the same time,the dry air was excluded.
In recently years,dehumidifier was widely used in house,warehouse,hospital,office and so on. It has solved a lot of problems for wet region.
Products details :
| Model No | DH-100 |
| Power input | 12V ,5A |
| Dehumidify capacity(30°C/RH=85%) | 500mL / Day |
| Rated Input | 12V ,5A |
| Noise data | ≤40dB(A) |
| Humidity Indicator | YES |
| Body Size (mm)DxWxH | 203×152×305 mm |
| Net weight | 1500g |
Specifications:
| Peltier thermal electric module 12V D.C 5A |
| 120mm brushless D.C fan |
| 1000ml water tank |
| Retractable handle |
| Removable front grill |
| De-humidifying ability: about 500ml/day at 85% RH. 30 |
| Automatic cut-off when water tank is full |
| Electronic switching sensors |
| 70 safety cut-off |
| Switching mode power adaptor 100-240Va.c 50/60Hz |
| Dimensions: 203×152×305 mm |
Description:
Portable evaporative dehumidifier DH100 is made by brand new plastic, good quality compressor and relevant spare parts. This product is multifunctional dehumidifier, which can be set humidity level according to different requirement. The appearance is very fashion and nice. This model is selling very well and popular all over the word with the very good price performance.
The package:
There are four items in the box:
- The DH100 unit
- The mains cable
- The switching mode power supply
- The instruction manual
Installation:
Remove all items from the package. Plug the flat rectangular D.C power plug of the switching mode power adaptor into the only socket located at the back of the unit, and plug the appropriate mains plug into the wall socket. Make sure the water tank is properly fitted into place for the power detector to be activated.
Notes:
- Remove the D.C plug first when the unit is being carried around
- Remove the front grill to clean the cold heat sink from time to time
- Place the unit on a flat surface
