AV6416 Palm OTDR 1.6m extra-short event dead zone
Product Summaries:
AV6416 palm OTDR is the newest instrument designed for testing FTTx network. It´s mainly used to measure the physical characteristics of optical fiber under test, such as the length,the transmission loss and the splice loss etc.. It can also locate the faults or breaks of optical fiber. It´s widely applied in the manufacture, construction and maintenance in optical fiber communication system.
AV6416 palm OTDR has the most advanced technology of double-color & material integrative mould,which is novel and beautiful in appearance.AV6416 offers three wavelengths and VLF in one handheld unit, especially for testing passive optical network (PON) in FTTx. In addition, it´s equipped with comfortable gallus for carrying conveniently
Mainly features:
ο Double USB interfaces, supporting USB stick and direct cable download to PC via ActiveSync
ο Supporting Bellcore GR196 file format in writing or reading
ο Function of intelligent indicating of remaining capacity of battery and warning if the voltage of battery is low.
ο WinCE operation system, double operating interface of Chinese and English
ο Built-in lithium battery with high capacity for over 10 hours of operating life
ο Visible fault locating (VFL)
ο Universal FC/PC,FC/SC,FC/ST connector type, it´s convenient for surface cleaning
ο Unique function of updating system on-line, returning to factory is unnecessary
Application:
AV6416 Palm OTDR is mainly used to measure FTTx network, it provides a low cost solution for users. AV6416 offers three measuring modes: manual mode (including real time mode and average mode), auto mode and dead zone mode.
Manual measurement mode: manual mode is suitable for skilled operator who is familiar with the instrument. In this measurement mode, to get more accurate results, real-time mode or average mode can be selected if necessary.
In real-time mode, the dynamic changes of fiber chain can be detected timely, it is very useful when you need to observe the effect and process of fiber being spliced or connected.
In average measurement mode, the noise in trace can be suppressed, and the SNR(signal noise ratio) is improved, therefore,the result is more accurate. In fact, the more average times is executed, the more noise in trace is suppressed, and the longer time is spent for signal processing. In practice, the average times should be set properly according to necessity.
Auto measurement mode: the optimized measurement conditions are set automatically, it´s unnecessary to operator to know about the complicated background knowledge and the further details of operating. In this mode, the more accurate results can be gained when proper average times are set, but it will increase the time of signal processing.
Dead zone mode: this mode is suitable for testing optical fiber with short distance and the optimized settings of distance range, pulse width and attenuator can be executed
automatically. To get the best result, the terminal return loss should be guaranteed less than -40dB.
Specifications
Main Specifications
|
||||
Main OTDR Modules
|
2101
|
2103
|
3105
|
3102
|
Center wavelength
|
1310nm/1550nm
±20nm
|
1550nm/1625nm
±20nm
(build-in filter)
|
1310nm/1550nm/1490nm±20nm
|
1310/1550nm/ 1625nm ±10nm
(build-in filter)
|
Type of optical fiber
|
SMF
|
SMF
|
SMF
|
SMF
|
Dynamic Range1
|
28 / 26dB
|
26 / 26dB
|
28 / 26 / 24dB
|
28 / 26 / 25
|
Distance Measurement Accuracy
|
±(1m + sample space + measurement distance×0.003%)
|
|||
Event Dead Zone2
|
≤1.6m
|
|||
Sampling Resolution
|
0.25 , 0.5 , 1 , 2 , 4 , 8 , 16m
|
|||
Distance Range
|
0.5, 1, 2, 4, 8, 16, 32, 64, 128, 256km
|
|||
Pulse width
|
10 , 30 , 80 , 160 , 320 , 640 , 1280 , 5120 , 10240ns
|
|||
Loss threshold
|
Didn't find what you're looking for?
Post Buying Lead or
contact our customer service specialist for help!
|