Pneumatic Tube clutch ventilated type LT1070
Ventilated type pneumatic tube clutch LT1070 for drilling rig drawwork
BOMCO and Honghua Pneumatic Tube Clutch fordrilling rig
Brief of Pneumatic Tube Clutch
Aim at the not enough an a kind of spirit for but developing clutch in common type increased on the construction a set of spread the heat spread it can equip.
The spirit moves the pneumatic cluth with compressed air for friction clutch that manipulate the motive source.Used for needing to be delivered the big torque generally with turn round the directional equipments with the fast a transformation last such as the pertroleum artesian well machine ships large machine pressure machine scoop out the machine ball whet machine rubber machine etc..
The pneumatic tube cluth delivers to torque big joit together steady easy to install the absorb librate can compensate a little amount lord from move the stalk capr face with path face opposite be partial to move from move part inertial and small service life long construction tightly packed seal completely sex good.The pneumatic transforms the resistance big the pneumatic transforms the resistance big the pneumatic material cost is high usege temperature contain certain restrict higher that 60℃ will lower the Pneumatic life span lower than -20℃ make the Pneumatic change the frailty easily.The spirit moves the clutch coalescence a main adoption rubs slice rub an etc..
Pneumatic type clutch according to its construction form of different can is divided into the common type again is two kinds of with ventilated type.
Specification of the Pneumatic Tube Clutch fordrilling rig
type | LT300/100 | LT500/250T | AVB600/250 | LT700/250T | LT700/135DY | AVB500/200 | |||
rotate speed | max | 1312-1578 | 1586-1701 | 1281-1544 | 1312-1578 | 1312-1578 | |||
rating | 758-912 | 916-983 | 740-892 | 768-912 | 768-912 | ||||
Torque n.m | max | 17110-24970 | 23390-26900 | 32200-46710 | 17110-24970 | 17110-24970 | |||
rating | 11406-16646 | 15590-17930 | 21466-31140 | 32100-47300 | 11406-16646 | 11406-16646 | |||
working pressure (mpa) | 0.7-1.0 | 0.7-0.8 | 0.7-1.0 | 0.7-1.0 | 0.7-1.0 | 0.7-1.0 | |||
pneumatic tube cubage (l) | 13×2 | 39512 | 2×2 | 2.28×2 | 24 | 13*2 | |||
attrition annulus dia (mm) | φ500 | φ496 | φ600 | φ700 | φ700 | Ø500 | |||
join link | max dia. | φ780 | φ750 | φ890 | φ1010 | Ø780 | Ø780 | ||
max width | 234 | 288 | 284 | 292 | 243 | 243 | |||
orientation dia. | φ300H8 | φ750F9 | φ340H8 | φ240H8 | Ø300H8 | Ø300H8 | |||
bolt number and dia. | 40H8×80 | 12-φ18H10 | 12-φ23H10 | 8-φ32H8 | 16-φ22H10 | 40H8*80 | |||
bolt distributing dia. | 10-φ18H10 | φ720 | φ420 | φ300 | φ400 | 10- Ø18H10 | |||
air tilet pipe screw thread | 2-G1/2" | 2-M201.5 | 2-G1/2" | 2-G1/2" | 1-M201.5 | 2-G1/2" | |||
Pneumatic Tube clutch ventilated type LT1070
Ventilated type pneumatic tube clutch LT1070 for drilling rig drawwork
BOMCO and Honghua Pneumatic Tube Clutch fordrilling rig
