24 Hours Continously Heating Medium Frequency Electric Induction Furnace For Forging
Description
1. Full digital control:control with high precision and high reliability
2. Voltage and current double closed-loop control system to ensure a stable reliable system operation.
3. Perfect protection system: over voltage,over current,lack of phase,lack of water, temperature is high, etc, various of protection,ensure the equipment's components will not be damaged when a fault occurs
4. High powder factor:the power and power factor of the equipment achieve to highest operating values
5. Complete extrocontrol interface:can easily achieve external temperature ect.closed-loop control
6. Power pneumatic performance 100% completely eliminate the problem of start
Before sales
Our professional technical recommend the right machine,and can also customise special machine as customer's requirement and special parts.
Sales following
During machine production, watching the machine quality and testing machine.and take pictures or make video for customer checking.
After Sales
We will send technical go to customer's factory to install and adjust machine.
We have after-sell service center in Vietnam and Indonesia,to supply all life-time machine maintance and repairment service.
Application
1. By detecting the rod temperature at the outlet of the induction coil, the heating power is controlled by
the temperature controller device, such to control the temperature of the rod.
2. Melting of rods inside the induction coil will not happen any more by the using of infrared sensor and
temperature control device. The operating is eased, at the same time, repair of the induction coil is decreased
greatly.
3. It is especially important and necessary to use infrared sensor when heating brass and aluminum rods
of which the forging temperature and melting point is very near.
It is used for melting non-ferrous metal, ferrous metal and nonmetallic part. Our factory produce smelting furnace
and vacuum smelting furnace.
The melting furnaces mainly used for smelting steel, iron, copper, stainless steel, aluminum, gold, silver, precious
stones, metallic and non-metal;
The melting furnaces is mainly used for smelting heated metal or non-metal under the environment of protecting
atmosphere (such as cobalt, tungsten, titanium, etc)
|
Model |
GTL-1430 |
GTL-2050 |
GTL-1850 |
GTL-1445 |
GTL-3065 |
|
Heating Size |
Φ145*300 |
Φ200*500 |
Φ180*500 |
Φ145*450 |
Φ295*650 |
|
Rated power |
700 KW |
934 KW |
798 KW |
932 KW |
1300 KW |
|
Productivity |
1.7 t/h |
3.3 t/h |
3.0 t/h |
2.7 t/h |
5.0 t/h |
|
Work temperature |
900 |
||||
|
Transformer capacity |
800 KVA |
1000 KVA |
1600 KVA |
||
|
Water consumption |
15 t/h |
19 t/h |
25 t/h |
||
Feature
1. IGBT(SIEMENS) technology, high conversion efficiency
2. Energy saving 15%-30%, compared to SCR/KGPS technology
3. Much more efficient than gas-fired and coal-fired method
4. 100% start-up success rate; power factor > 95%
5. Perfect and complete protection functions, increasing machine's reliability & stability
6. No special foundations required, Low operating cost, Easy operation
7. Modular design, ease of maintaining and repairing
