Simple Installation Wall Panel Cold Roll Forming Machine 25 Stations
Machine specification
- One roll forming machine only can produce one profile.
- The roof panel Rib profile has an excellent strength weight ratio, durable and cost effective.
- This corrugated steel sheet products are widely used for commercial and industrial applications like factories, shop lots and apartments.
- Besides being used as metal roofs, Rib is equally suitable for use as cladding and fascia or even hoarding. The available materials are including colored steel, GI steel coil, aluminum, or the other metal suitable for cold forming technology.
- It is suited for most roofing applications and is ideal for industrial and commercial wall cladding.
- The optimum rib spacing requires less fasteners resulting in a more visually pleasing profile, that is faster and easier to install.
- Custom roll formers request the sectional profile with sizes, so that we can confirm the rib height, effective cover, roof pitch, etc. and send you the exact quotation.
- Custom profiles are welcome! The following is some corrugated panel roofs profiles for your reference.
Sheet metal roll forming machine Main Parameters
Line structure |
Portal-type frame style, 45# steel |
Forming Roller Stations: |
25 Stations |
Forming Roller shaft: |
φ55mm |
Forming rollers |
GCr15, Quenching, hardness HRC56-62º |
Forming Speed: |
12 meters / min |
Main motor: |
11kw |
Material of Sheet: |
Soft Quality (Annealed) Galvanized or colored Sheets |
Sheet Thickness: |
0.2mm |
Control mode |
3xAC380V. 50HZ. (Other system is optional) |
Brief introduction
- Decorative sheet metal roll forming machines are mainly for manufacturing Suspended ceiling panels and wall panels.
- With its beautiful surface and simple installation, the aluminum and color coated decorative sheets of ceiling panels and wall panels are widely used in the decorative industry.
- This kind sheet metal roll forming machine can rollform metal wall sheets which can replace the traditional wooden partition board.
- The following is the relative introduction for the two kinds sheet metal forming machines.
Sheet metal roll forming machine for wall panel and ceiling panel Technology specifications
Decorative sheet metal roll forming machine is consisted of sheets feeding table, material feeding device, main roll forming machine, embossing device, slitting device, run-out table, electrical control system.
Profile sample -----Decorative sheet metal roll forming machine
The following profile drawings are some decorative sheets of wall and ceiling panel for your reference, the normal material thickness is 0.4-0.6mm, coated steel sheet or aluminum sheet. Custom style decorative sheets are welcome!
For information on metal roof sheets profiles by our roll-forming mills, please contact with us!
Machinery Photos
Workshop Show