Vinyl Small Eco Solvent Printer Waterbased Photo Sticker Printer

Printhead

mirco piezo printhead : Epson DX7 or DX5 print head

Color

Double 4 Color (C- M- Y- K-K- C- M- Y)

Printing Resolution

1440dpi * 1440dpi maximum

Print Width

3200mm

Print Speed

55 sq. m./h          2 pass

28 sq. m./h          4 pass

19 sq. m./h          6 pass

14 sq. m./h          8 pass

Ink

waterbased. Eco-solvent, sublimation

Ink Capacity

1.8L Continuous Ink Supply Cartridge * 4 pcs

Media

PVC, PP, Vinyl, flex, one way vision, frontlit, backlit, sticker,Mesh...

Heating System

Front, middle, back three sections heating, PID temperature controller

Adjustable range: room temperature~80°C

Drying system

Fans cooler

Rip Software

Photoprint 11.0V, Ultra print

Interface

USB 2.0, RS 232

Operation System

Windows XP, windows2000

Input Power

AC 220-240V 50/60 HZ  15A

Working Environment

Temperature:20-25 °C, Humidity: 40%-70%

Size/Weight 

Machine 

L*W*H : 4.5*0.8*1.3m  /  700KGS

packaging

L*W*H : 4.85*1.00*1.58m /  800KGS

DX5 Printhead

Instruction: Epson DX5 Resolution: 1440DPI

Color: 4 colors

Print mode: 4, 6, 8, 12 Pass

Notes:

A: Operators need to make antistatic treatment, please wear the Anti-static devices if permission, to prevent the high static load from burning the circuit board inside print head.

B: During installation, try not to directly touch the surface of print head.

Eco solvent printer main board

Introduction: EPSON DX5 and DX7 eco solvent printer main board.

Usage: Send printing data signal, control the operations of main parts.

Notes:

A: Resist dirt and moisture for the main board.

B: Turn off the power when check the main board. Mark the plug signal line and supply line to avoid connection mistake which can burnout the main board.

Eco solvent printer print head board

Introduction:

EPSON DX5 and DX7 eco solvent printer print head board.

Usage: Receive printing data signal and control inkjet and voltage of the print head.

Notes:

A:Resist dirt and moisture for the print head board.

B: The print head cable must be inserted into the right place; otherwise it may burnout the print head.

Sheet feeder

Introduction: Auto-feed, keep the material tension balance, make the material pass through the print platform smoothly and do nice printing work.

Notes:

A:. When printing materials, rigidly fix the material and sheet feeder shelf.

B: Try to put the material in middle of the platform, make the material get equal force by the roller, so it can pass through the print platform smoothly.

Ink cartridge

Introduction: 2 Liter ink cartridge, provide the ink continuously which is very convenient. Ink color is clear, so it is not easy to add the wrong color ink.

Notes:

A: Make sure each color ink to the corresponding ink cartridge.

B: It is enough when the ink reaches 3/4 of the cartridge.

Suction and heating device

Introduction: Automatic suction when printing which can make the print materials adsorb to the platform better, so the heater can heat and dry the printed material more evenly.

Notes:

A: Keep the suction plate clean and tidy.

B: Adjust the suction strength before printing, as well as proper heating temperature.