Sanitary Stainless Steel Clamped/Quick Install Ball Valve

Quick detail:
 

Model: DIA Standard or Nonstandard: Standard Structure: Ball
Pressure: Medium Pressure Power: Pneumatic Material: Stainless Steel
Temperature of Media: Medium Temperature Media: Water Port Size: 15-200

Packaging Detail: Carten and polywood case

Specifications

Sanitary Pneumatic ( manual) ball Valve (DIA)
HS Code: 8481804090

TECHNICAL PARAMETER:

1. Application:
It can be used to transfer the material. The range of application including food, beverage processing, medicine and chemical industry area, the bore design won't have any fluid resisitance. It can be used to trat the fluid and the handling viscous fluid or particulate material.


2. Material:
Steel parts: Stainless steel 304 or stainless steel 316L
Sealing: EPDM. (standard)
SILICON, FDM, HNBR(CHOOSE).


3. Advantages of Design:
The complete drainage system can avoid the retention of the products.
A)The Normally close valve (closed by spring) is the standard type
B)The normally open type valve (open by spring) is through simply conversion of the closed one's pneumatic.
The valve seat opened into the tank internal is to prevent accidental opening.
Even when welded with flanges, it can also be adjusted by 360°
The window opened to check the shaft sealing performance.
Loose the clamp can be simple disassembly.

4. Connection types:
Welded.
Clamped
Screw or threaded ( male or female )
Welded - srew
Flange
To assure the connection and substitution with imported facilities, all the connecton styles withe pipe or equipment are made to DN11850, IDF / ISO, SMS 3A international standard size.

5. Size:
DIN: DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100
3A: 3/4", 1", 1 1/2", 2", 2 1/2", 3", 4"
SMS: 19, 25, 32, 38, 51, 63, 76, 89, 102
ISO:? 19,? 25,? 32,? 38,? 51,? 63,? 76,? 89,? 102,
6. Operation Type:
Manual: Lever or duck-billed
Pneumatic actuator: Stainless teel or plastic with control box or not.
Electric actuator: Sigle action or double action
7. Features of Pneumatic actuator:
Normally opened: The spring is OPEN and pneumatic OFF
Normally closed: The spring is OFF and pneumatic OPEN
With signal feedback inductive proder / sensor for option
Compact appearance, small volume, large torgue
Simple and convenient assembly
8. Technical Parameter:
OD Range: DN25~ DN200, 1"~ 8"
Material pressure: Less than 10Bar
The actuator torque: 40NM
Compressed air pressure: 4~8bar
Finishing degree:
Cutting: Ra1.5 ~ 3.2um
Polish: Ra0.4~ 0.8um
9. Requirements for compressed air quality that the executor needs:
Compressed air joint: Air pipe equiped equips with air adapter R1/"
Max grain size: 0.11mm
Max Oil content: 0.08 ppm
Dew point: 10 ° C or less
Max water conent: 7.5g/kg