| item | ecoobd2 |
| color | blue |
| version | diesel |
1. EcoOBD2 Features:
1. EcoOBD2 saves 15% fuel for Diesel cars.
2. EcoOBD2 is very easy to use:
(1). Plug EcoOBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on.
(2). EcoOBD2 settings are optional and the best for your car. Even the parameters are different for each vehicle, there might not be a need to make an additional adjustment. EcoOBD2 will recognize your vehicle and your driving habits after around 200 km/150 miles driving, and then EcoOBD2 adjusts itself to match your car perfectly.
(3). EcoOBD2 works on the basis of changing the signal form ECU. As a consequence, it changes the whole injection map.
(4). The main difference between EcoOBD2 Chip Tuning Box and Remapping tuning methods is that EcoOBD2 Chip Tuning Box is easily removable, and after unplug you go back to the factory settings. EcoOBD2 is the cheap and safe type of tuning.
Remapping is a permanent change to your car. This is the expensive tuning and you cannot remove it.
3. EcoOBD2 is equipped with the engine protection function and 100% safe for your car engine.
4. EcoOBD2 produced on the printed circuit board in SMD technology.
5. EcoOBD2 Chip Tuning Boxes are high quality.
2. EcoOBD2 Descriptions:
1. EcoOBD2 is a Plug & Drive Ready device.
2. EcoOBD2 is easy to install. Just plug it into the OBD2 connector of cars. EcoOBD2 fits all car from the year of 1996.
3. It works based on OBD2 protocols as remaping the Car's computer ECU. After driving 200 km road total, EcoOBD2 adjusts itself to the car, according to the drivers' habits and always keeps remaping the ECU to save fuel lower and immission.
3. EcoOBD2 Functions:
According to your driving habits, EcoOBD2 makes new map in the car's computer ECU for the vehicle's low fuel consumption.
As you driving much more KM/Mile, it renews the map and adjusts itself to match your car perfectly for more fuel saving.
4. How Does EcoOBD2 Chip Tuning Box Work?
1. EcoOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to decrease the fuel consumption of your car.
2. When it plugged into OBD2 connector, EcoOBD2 receives the information from the car computer ECU.
3. With the received data from ECU, EcoOBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to decrease the fuel consumption of your car.
4. EcoOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine.
5. EcoOBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting.
6. EcoOBD2 does not change any of the settings permanently. To turn back to the car's original settings, just unplug EcoOBD2 from OBD2 connector.
5. Installation And Calibration:
1 - Pull the Car Key out from the ignition.
