Customized 2000mm Excavator Tilt Bucket for Hitachi ZX200-3 Excavator
Specification:
| Excavator model | Hitachi ZX200-3 |
| Bucket width | 2000mm |
| Bucket capacity | 1.00 cum |
| Tilt degree | +/- 45 degree |
| Cylinders | 2 pcs |
| Pipe joint | 3/8" |
| Cutting edge material | Q345B |
| Cutting edge thickness | 25mm |
| Cutting edge quantity | 2 pcs |
| Warranty 6 month | 6 month |
| Installation size | Standard dimension |
Application:
-Tilt cleaning.
-Multi-excavating.
-Handling soft material
Description:
1. In rugged work condition,If the excavator have a tilt bucket,do not need to move often for adjusting position. It's convenient and high efficient.It will be very popular in the future.
2. Driven by hydraulic pressure, high efficiency and convenient.
3. Material: Q345B. We also have Q420D and Q690D for optional.
4. As customer request, we make this tilt bucket with a bolt cutting edge.
5. The width is optional, we make this tilt bucket with 2000mm width. But if you want to make more wider or more shorter, also no problem.
6. Standard tilt degree is +/-26 degree, if you need higher degree, we can customize for you. Max. can up to +/-45 degree.
7. This tilt bucket with 2 pcs cylinder, but if very small excavator, only 1 cylinder.
8. Hardox450 is high hardness steel, If you need NM360 or Hardox450 as the cutting edge of out tilt bucket, also no problem, let me know freely.
9.The cylinder Max. suffer from stress is 32MPa. We have cylinder protection guard for cylinder.
10. All our pins is harden pins,and we prepare bushing for all pins, and each pin&bushing have grease seals.
11. For main pin(connect pick-up-head to mainbody),we double sealed for greace at both side.
Tilt bucket pictures in Workshop:
