launching / landing / lifting / salvage marine airbag for floating boat lift
Major Strengths of Marine Airbag:
1.High safety level: equipped with a reliable safety valve, our airbags can stand the maximum pressure up to 4 times that of the operating pressure.
2.Good air tightness: pressure decreases less than 10% for a period of 24 hours.
3.Long lifespan: it is guaranteed that our airbags can sustain their designed operating pressure for 3 years.
4.A complete set of solutions is available.
Every year we will do the explosion test for every type of the Ship Launching Airbag , safety is always our priority.
Marine Airbag Introduction
Invented in China, the airbag technology has become widely used for ship launching, heavy lifting and moving, and buoyancy with superior advantages, such as significantly reducing cost (well over 30%) as well as being safe, easily adaptable to various harsh working environments, and environmentally friendly.
Marine Airbag Specifications:
|
Diameter |
Layer |
Work pressure |
Diameter |
Layer |
Work pressure |
|
D=0.8M |
3 |
0.13 Mpa |
D=1.5M |
3 |
0.07 Mpa |
|
4 |
0.17 Mpa |
4 |
0.09 Mpa |
||
|
5 |
0.21 Mpa |
5 |
0.11 Mpa |
||
|
6 |
0.25 Mpa |
6 |
0.13 Mpa |
||
|
7 |
0.30 Mpa |
7 |
0.15 Mpa |
||
|
8 |
0.33 Mpa |
8 |
0.18 Mpa |
||
|
D=1.0M |
3 |
0.10 Mpa |
D=1.8M |
3 |
0.06 Mpa |
|
4 |
0.13 Mpa |
4 |
0.08 Mpa |
||
|
5 |
0.17 Mpa |
5 |
0.09 Mpa |
||
|
6 |
0.20 Mpa |
6 |
0.11 Mpa |
||
|
7 |
0.25 Mpa |
7 |
0.13 Mpa |
||
|
8 |
0.28 Mpa |
8 |
0.15 Mpa |
||
|
D=1.2M |
3 |
0.09 Mpa |
D=2.0M |
3 |
0.05 Mpa |
|
4 |
0.11 Mpa |
4 |
0.07 Mpa |
||
|
5 |
0.14 Mpa |
5 |
0.08 Mpa |
||
|
6 |
0.17 Mpa |
6 |
0.10 Mpa |
||
|
7 |
0.20 Mpa |
7 |
0.12 Mpa |
||
|
8 |
0.23 Mpa |
8 |
0.14 Mpa |
The Selection of ship launching and landing rubber airbag
Diameter: General speaking, the diameter of airbags for ship used is Dia1.5m. If the piers’ height is a little higher, we could choose the larger diameter airbags, such like Dia1.8m or Dia2.0m; and for the Dia1.0m or Dia1.2m airbags are suitable for some smaller sized ships.
Length of Effective (Le): The Le of airbags is the length of airbag’s cylinder part, and does not include the length of head vertebral body.
(1) Ship width≤20m: In theoretical, Le of airbags= Ship width (B); and if the length of airbags could not feet the ship width, airbags could be put under ships for two rows.
(2) Ship width>20m: Generally speaking, airbags will be put under ship as two rows, as butt arrangement or cross arrangement.
Operating Pressure of Airbags: Less than DWT 1,000 could choose S1 Category Airbags; Larger than DWT 1,000 could choose S2 Category Airbags; S3 Category Airbags are used for the special higher working pressure requirement situation.
NO.s of Airbags (N): The numbers of airbags required is decided by the length of ships/vessels, and N is equal to the NO.s of putting under ship body (N1) plus the spare ones (N2), which is formula: N1+N2=N (N1 stands for the pieces under ships, N2 stands for the pieces of spares). The main factors to decide numbers of airbags required is ship DWT and category of airbags. (NOTE: N1=DWT / (Bearing Capacity of Unit for airbags×Le), spare airbags are decided by the fact situation.)
The structure of Marine Airbag
The structure Nanhai No. 1 Marine airbag for ship is shown in Fig. 4. It consists of a bag body and end-iron component. The bag body is made from vulcanization of base rubber and reinforced fiber material. The end-iron component is made of metal materials and connected to the bag body firmly.
Our Marine Airbag
Nanhai Airbag ship launching and landing rubber marine airbag approved ISO 14409
